| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
3
|
13 Dec 2018 11:02 |
Thomas | Routine | Hardware | Testing V1725 digitizers | Couple weeks of work documented in one elog...
V1725 serial numbers: 455, 392, 460, 462, |
|
|
6
|
17 Jan 2019 15:47 |
Thomas | Routine | Hardware | Added raided HD to ds-proto-daq | Added pair of 10TB hard-drives in raid-1 to
ds-proto-daq. MIDAS data files will get
written to this raid volume.
|
|
|
10
|
06 Feb 2019 14:12 |
Pierre | Configuration | Hardware | Extended Trigger Time Tag (ETTT) | Confirmed this ETTT configuration is working.
ETTT Enabled [22..21] |
|
|
12
|
08 Feb 2019 12:08 |
Thomas | Problem | Hardware | Installed Marco's A3818; didn't work | I installed Marco's A3818 PCIe card. Didn't
seem to work. I got communication errors
talking to link 2. The
|
|
|
13
|
13 Feb 2019 16:45 |
Pierre | Problem | Hardware | A3818 from Marco | Checking again Marco's A3818:
- Port #2 (third from top of card) is acting
up.
|
|
|
16
|
05 Mar 2019 14:20 |
Thomas | Routine | Hardware | Installed network card | I installed a PCIe 1Gbps network card and
configured it as a private network. The
PC (ds-proto-daq) is
|
|
|
22
|
27 Mar 2019 08:57 |
Pierre | Configuration | Hardware | CERN setup | Found that the Trigger out from the CB is
on output1
Trigger / Not used
|
|
|
44
|
25 Oct 2019 07:17 |
Simone Stracka | Routine | Hardware | Photoelectronics activities on October, 24 | Crew: Edgar Sanchez Garcia, Sam Hill, Simone
Stracka, Tom Thorpe, Yi Wang
Morning: Tested photocurrents for |
|
|
45
|
25 Oct 2019 07:44 |
Simone Stracka | Routine | Hardware | MB2 activities on October 25 | Crew: Edgar Sanchez Garcia, Sam Hill, Simone
Stracka, Tom Thorpe, Yi Wang
|
|
|
47
|
27 Oct 2019 06:08 |
Simone Stracka | Configuration | Hardware | Converters installed in VME crate | People: Edgar, Simone
Installed differential to single-ended
converters in VME crate, and turned crate |
|
|
52
|
28 Oct 2019 15:10 |
Simone Stracka | Configuration | Hardware | LV for steering module and current status of CAEN mainframe | The HV board from Naples did not turn on:
Yury gave it to the CAEN guys to check and/or
bring back for replacement. |
|
|
55
|
01 Nov 2019 06:50 |
Alex Kish | Configuration | Hardware | Turn off the fields | Ramp down the fields, in 200V steps.
Nominal values:
1st ring: 4180 V
|
|
|
58
|
01 Nov 2019 09:49 |
Alex Kish | Configuration | Hardware | Turn off the fields | Ramp UP the fields, in 100V steps.
Nominal values:
|
|
|
65
|
04 Nov 2019 06:02 |
Alex Kish | Configuration | Hardware | Increased fields! | Increased drift and extraction fields.
Current settings: wire gate 5100 V, 1st ring: |
|
|
87
|
06 Nov 2019 05:58 |
Ben Smith | Configuration | Hardware | CAEN VME Crate DHCP | The CAEN VME crate now gets its IP address
from the ds-proto-daq DHCP server. To do
this, I set the IP address of the crate to |
|
|
98
|
08 Nov 2019 05:14 |
Ben Smith | Configuration | Hardware | Adding darkside01 to the network | The analysis server from Roma (darkside01)
is now connected to the local network. It
is not yet connected to CERN.
|
|
|
99
|
08 Nov 2019 08:35 |
Ben Smith | Configuration | Hardware | Failed to talk to steering module from DAQ PC | I have failed to communicate with the steering
module arduino from the DAQ PC.
|
|
|
100
|
08 Nov 2019 09:09 |
Ben Smith | Configuration | Hardware | Adding darkside01 to the network | The cable has been fixed. Socket 0001/007
is still not active. |
|
|
103
|
08 Nov 2019 22:31 |
Marco | Configuration | Hardware | Adding darkside01 | Wrong MAC address fixed in CERN network
setting, now the machine is visible from
external network too: |
|
|
128
|
14 Nov 2019 00:09 |
Ben Smith | Problem | Hardware | Chronobox not serving human webpage | The chronobox isn't serving the human-interactive
webpage that should be visible at https://m-darkside.web.cern.ch/chronobox/
- it responds with "File not found". Oddly, |
|