HW-Time-Slice Firmware-Filter Software vx2740 Steering Module Reports MVM MVM Vexos MVM-Bug listing MVM TRIUMF Local DS Prototype DS Cryogenic For Shifters BCIT-31 ChronoBox Run Operation DS-DAQ
  CERN DS-Proto0 read-only backup, Page 1 of 1  Not logged in ELOG logo
ID Date Author Type Category Subject Text Attachments
  20   15 Nov 2019 00:15 Yi Wang       
  19   14 Nov 2019 09:02 Sam Hill   TPC pressure: 32 mbar Recirculation pressure
39 mbar

Had some problems with the Chronobox
  
  18   13 Nov 2019 09:53 Xiang Xiao   18:54 TPC pressure 258 mabr, recirculation
pressure 259 mbar 

MB off
  
  17   12 Nov 2019 23:46 Yi Wang   08:41 TPC pressure 260 mbar,
recirculation pressure 260 mbar

gas pocket ON
  
  16   11 Nov 2019 23:47 Yi Wang   08:38 TPC pressure 238 mbar,
recirculation pressure 242 mbar

gas pocket ON
  
  15   11 Nov 2019 11:28 Sam Hill   20:30 TPC pressure 252 mbar, recirculation
pressure 254 mbar

See DS Proto log for issues with
  
  14   11 Nov 2019 00:00 Yi Wang   08:45 TPC pressure 287 mbar,
recirculation pressure 289 mbar, no
bubble from gas pocket outlet, condenser
  
  13   09 Nov 2019 23:55 Yi Wang   08:55 TPC pressure 314 mbar, recirculation
pressure 319 mbar, no bubble from gas
pocket outlet
  
  12   09 Nov 2019 11:02 Sam Hill   20:07November 9, 2019

Switch On LED

Switch OFF MB
  
  11   08 Nov 2019 23:13 Xiang Xiao   08:16, November 9, 2019

TPC pressure (mbar): 225 
      
  
  10   07 Nov 2019 23:26 Yi Wang   08:35 TPC pressure 315 mbar, recirculation
pressure 310 mbar, no bubble from gas pocket
outlet
  
  9   07 Nov 2019 12:41 Yi Wang   Evening checklist   
  8   06 Nov 2019 12:33 Yi Wang        
  7   05 Nov 2019 11:14 Yi Wang   Stop fast circluating, will let the cryogenic
system run in slow circlulating mode over
the night.
  
  6   04 Nov 2019 07:08 Alex / Sam   Normal mode channel by channel.

HV: on

LEDs: on
  
  5   04 Nov 2019 06:59 Alex / Sam   HV: off

LEDs: on

/home/dsproto/online/dsproto_sy4527
  
  4   04 Nov 2019 06:45 Alex / Sam   HV: off

LEDs: off

python3 iv_curve.py --no_steering
  
  3   01 Nov 2019 19:06 Alex Kish   Faster P increase (40 mbar/hour). Unstable
presure (20 mbar RMS).

 
  
  2   01 Nov 2019 13:42 Alex Kish   Faster P increase (40 mbar/hour). Unstable
presure (20 mbar RMS).

 
  
  1   25 Oct 2019 11:45 Pierre-Andre Amaudruz   If there is more things to say!   pix-sample.jpg 
ELOG V3.1.4-cb3afcd8