| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
51
|
28 Oct 2019 14:56 |
Simone Stracka | Problem | Software | Issues with network configuration for steering module | We have tried to connect the steering module
to the DAQ pc via Luigi's USB-Ethernet
adapter. |
|
|
52
|
28 Oct 2019 15:10 |
Simone Stracka | Configuration | Hardware | LV for steering module and current status of CAEN mainframe | The HV board from Naples did not turn on:
Yury gave it to the CAEN guys to check and/or
bring back for replacement. |
|
|
124
|
12 Nov 2019 10:08 |
Edgar Sanchez | Routine | General | Laser run | Run 1096 Laser run
Chronobox: External
trigger Enable |
|
|
134
|
15 Nov 2019 00:19 |
Yi Wang | Routine | General | Laser run | Run 1166 Laser run
Chronobox: External
trigger Enable |
|
|
140
|
18 Nov 2019 02:40 |
Pascal/Julie | Routine | General | Laser run | Run 1232 Laser run
Chronobox: External
trigger Enable |
|
|
144
|
19 Nov 2019 00:14 |
Pascal/Julie | Routine | General | Laser run | Run 1252 Laser run
Chronobox: External
trigger Enable |
|
|
151
|
14 Oct 2020 08:39 |
Tom Thorpe | Routine | General | Log regarding MB2 removal from Proto-0 | Drive folder with data files and some pictures: https://drive.google.com/drive/folders/1Sr27kQTOO2kciBY7v-wYBP06tWLVEjiP
Lab notes @ CERN
11/10/2020 |
|
|
37
|
13 Jul 2019 14:50 |
Marco Rescigno | Routine | General | Long Laser run on disk | Run 747 , 250 k events
as requested by alessandro 40%
post trigger, acquisition window 16 us. |
|
|
32
|
12 Jul 2019 01:27 |
Marco Rescigno | Configuration | | MB1 test in proto-0 setup/1 | Changed custom size to 500 (20 us), tested
ok run 681 |
|
|
33
|
12 Jul 2019 02:05 |
Marco Rescigno | Problem | Trigger | MB1 test in proto-0 setup/1 | Tried to get laser sync signal into chronobox
(clkin1 input), apparently all triggers dropped
by chronobox |
|
|
36
|
12 Jul 2019 11:34 |
Marco Rescigno | Routine | General | MB1 test in proto-0 setup/2 Run 718 | Run 718 has 25 channel readout Board 0
ch 0-15 and Board 0 ch 0-7.
Laser triggered, some noise, maybe |
|
|
35
|
12 Jul 2019 07:58 |
Marco Rescigno | Routine | General | MB1 test in proto-0 setup/day 2 | Implemented a simple charge integration
on the midas display, most of the channels
look almost as good as this one. |
|
|
45
|
25 Oct 2019 07:44 |
Simone Stracka | Routine | Hardware | MB2 activities on October 25 | Crew: Edgar Sanchez Garcia, Sam Hill, Simone
Stracka, Tom Thorpe, Yi Wang
|
|
|
30
|
02 Jul 2019 18:01 |
Thomas | Routine | Software | MIDAS running again | Darkside people seem to be doing some tests
at CERN next week. It looks like they aren't
going to use our DAQ (they will I think just |
|
|
29
|
11 Apr 2019 08:20 |
Thomas | Routine | Trigger | Missing ZMQ banks | I have done a couple longer tests of the DAQ
setup. The runs were done with a high trigger
rate of ~60Hz, with
|
|
|
101
|
08 Nov 2019 10:07 |
Edgar Sanchez | Routine | General | Monitoring Data Taking | Run 995
Gas pocket: ON
(thinkness 7mm) |
|
|
104
|
09 Nov 2019 00:13 |
Xiang Xiao | Routine | General | Morning data taking | "ERROR INFO: 10:38:10.924 2019/11/09
[feov1725MTI00,ERROR] [feoV1725.cxx:1048:read_trigger_event,ERROR]
Error: did not receive a ZMQ bank after 100.000000 |
|
|
115
|
11 Nov 2019 01:12 |
Yi / Edgar | Routine | General | Morning data taking | Run 1065
Gas pocket: ON
(thinkness 7mm) |
|
|
121
|
12 Nov 2019 00:24 |
Yi Wang | Routine | General | Morning data taking | Run 1084
Gas pocket: ON
(thinkness 7mm) |
|
|
125
|
13 Nov 2019 00:08 |
Yi Wang | Routine | General | Morning data taking | Run 1099
Gas pocket: ON
(thinkness 7mm) |
|