ID |
Date |
Author |
Type |
Category |
Subject |
Text |
|
41
|
16 Jul 2019 03:17 |
Marco Rescigno | Routine | General | run 772, scintillation events triggering on all channels | Majority of 5, threshold at 1000 ADC count,
13 channels enabled (10 trigger signals)
50 Hz, 30 us window. |
|
42
|
16 Jul 2019 03:51 |
Marco Rescigno | Routine | General | run 773, scintillation events triggering on all 24 channels | Majority of 5, threshold at 1000 ADC count,
24 channels enabled (16 trigger signals)
100 Hz, 30 us window. |
|
43
|
16 Jul 2019 03:53 |
Marco Rescigno | Routine | General | run 774, scintillation events triggering on all 24 channels and 200 us window | Majority of 8, threshold at 1000 ADC count,
24 channels enabled (16 trigger signals)
10 Hz, 200 us window, trigger at 9.5 microseconds. |
|
44
|
25 Oct 2019 07:17 |
Simone Stracka | Routine | Hardware | Photoelectronics activities on October, 24 | Crew: Edgar Sanchez Garcia, Sam Hill, Simone
Stracka, Tom Thorpe, Yi Wang
Morning: Tested photocurrents for |
|
45
|
25 Oct 2019 07:44 |
Simone Stracka | Routine | Hardware | MB2 activities on October 25 | Crew: Edgar Sanchez Garcia, Sam Hill, Simone
Stracka, Tom Thorpe, Yi Wang
|
|
46
|
26 Oct 2019 07:33 |
Sam Hill | Problem | Software | Test of IV Script | People: Simone, Sam, Tom, Edgar
Tested IV curve python script that
runs using MIDAS. Measured resistance consistant |
|
47
|
27 Oct 2019 06:08 |
Simone Stracka | Configuration | Hardware | Converters installed in VME crate | People: Edgar, Simone
Installed differential to single-ended
converters in VME crate, and turned crate |
|
48
|
28 Oct 2019 06:28 |
Simone Stracka | Problem | Software | Need python3 package tkinter on DAQ pc | We need python3 package tkinter installed
on ds-proto-daq in order to run the steering
module GUI. |
|
49
|
28 Oct 2019 08:33 |
Ben Smith | Problem Fixed | Software | Need python3 package tkinter on DAQ pc | I have installed the python3-tkinter package
from yum. I checked that "import tkinter"
works from a python3 prompt. |
|
50
|
28 Oct 2019 14:10 |
Ben Smith | Problem Fixed | Software | Converters installed in VME crate | > V1725 board #0 logic level is set to TTL
(boards #1, #2, #3 to NIM)
|
|
51
|
28 Oct 2019 14:56 |
Simone Stracka | Problem | Software | Issues with network configuration for steering module | We have tried to connect the steering module
to the DAQ pc via Luigi's USB-Ethernet
adapter. |
|
52
|
28 Oct 2019 15:10 |
Simone Stracka | Configuration | Hardware | LV for steering module and current status of CAEN mainframe | The HV board from Naples did not turn on:
Yury gave it to the CAEN guys to check and/or
bring back for replacement. |
|
53
|
01 Nov 2019 06:07 |
Ben Smith | Problem Fixed | Software | Restoration of network settings | For a few days we were unable to access ds-proto-daq
remotely. We were also unable to reach the
outside world from ds-proto-daq.
|
|
54
|
01 Nov 2019 06:15 |
Ben Smith | Problem Fixed | Software | Restoration of elog | After booting, the elog was only showing logs
from before July, and was missing the "For
Shifters" category. It appears we were loading |
|
55
|
01 Nov 2019 06:50 |
Alex Kish | Configuration | Hardware | Turn off the fields | Ramp down the fields, in 200V steps.
Nominal values:
1st ring: 4180 V
|
|
56
|
01 Nov 2019 09:06 |
Alex Kish | Routine | General | run 826, zero-field with gas pocket | Gas pocket: ON
Fields: OFF
Threshold: 400 |
|
58
|
01 Nov 2019 09:49 |
Alex Kish | Configuration | Hardware | Turn off the fields | Ramp UP the fields, in 100V steps.
Nominal values:
|
|
60
|
01 Nov 2019 10:56 |
Alex / Marco | Routine | General | run 829, with nominal fields | Gas pocket: ON
Fields: ON
Threshold: 200 |
|
61
|
03 Nov 2019 07:46 |
Alex Kish | Routine | General | run 833, with nominal fields | Gas pocket: ON
Fields: ON (wire
gate 3780 V, 1st ring 4180 V, cathode 6180 |
|
62
|
03 Nov 2019 08:15 |
Alex Kish | Routine | General | run 834, drift field ON, extraction OFF | Gas pocket: ON
Fields: drift
field ON (1st ring 4180 V, cathode 6180 V), |
|