| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
70
|
05 Nov 2019 01:22 |
Ben Smith | Configuration | Digitizer | V1725 board config | The V1725s have been changed to have board
config 0x50 rather than 0x10. This means
that they will now trigger on the leading |
|
|
69
|
04 Nov 2019 09:02 |
Alex/Yi/Ben | Routine | General | run 865, fields on | Gas pocket: ON
Fields: wire
gate 3780 V, 1st ring: 4500 V, cathode: 7000 |
|
|
68
|
04 Nov 2019 08:03 |
Ben Smith | Routine | Software | New script for setting self-trigger thresholds | I have created a new script that simplifies
the adjustment of self-trigger thresholds
(e.g. to change between "noise" runs with |
|
|
67
|
04 Nov 2019 08:00 |
Ben Smith | Configuration | MIDAS | Change of location of history files | /home was getting very full on ds-proto-daq,
so I moved the history files onto the /data
disk. There is now a symlink from ~/online/history |
|
|
66
|
04 Nov 2019 07:57 |
Ben Smith | Configuration | Software | Package installations | This morning I installed the xrootd-client
and python3-devel packages from yum. For
the latter to work, I needed to do a yum |
|
|
65
|
04 Nov 2019 06:02 |
Alex Kish | Configuration | Hardware | Increased fields! | Increased drift and extraction fields.
Current settings: wire gate 5100 V, 1st ring: |
|
|
64
|
03 Nov 2019 09:17 |
Alex Kish | Routine | General | run 836, zero drift field | Gas pocket: ON
Fields: drift
field OFF (1st ring 0 V, cathode 0 V), extraction |
|
|
63
|
03 Nov 2019 08:49 |
Alex Kish | Routine | General | run 835, zero drift field | Gas pocket: ON
Fields: drift
field OFF (1st ring 0 V, cathode 0 V), extraction |
|
|
62
|
03 Nov 2019 08:15 |
Alex Kish | Routine | General | run 834, drift field ON, extraction OFF | Gas pocket: ON
Fields: drift
field ON (1st ring 4180 V, cathode 6180 V), |
|
|
61
|
03 Nov 2019 07:46 |
Alex Kish | Routine | General | run 833, with nominal fields | Gas pocket: ON
Fields: ON (wire
gate 3780 V, 1st ring 4180 V, cathode 6180 |
|
|
60
|
01 Nov 2019 10:56 |
Alex / Marco | Routine | General | run 829, with nominal fields | Gas pocket: ON
Fields: ON
Threshold: 200 |
|
|
58
|
01 Nov 2019 09:49 |
Alex Kish | Configuration | Hardware | Turn off the fields | Ramp UP the fields, in 100V steps.
Nominal values:
|
|
|
56
|
01 Nov 2019 09:06 |
Alex Kish | Routine | General | run 826, zero-field with gas pocket | Gas pocket: ON
Fields: OFF
Threshold: 400 |
|
|
55
|
01 Nov 2019 06:50 |
Alex Kish | Configuration | Hardware | Turn off the fields | Ramp down the fields, in 200V steps.
Nominal values:
1st ring: 4180 V
|
|
|
54
|
01 Nov 2019 06:15 |
Ben Smith | Problem Fixed | Software | Restoration of elog | After booting, the elog was only showing logs
from before July, and was missing the "For
Shifters" category. It appears we were loading |
|
|
53
|
01 Nov 2019 06:07 |
Ben Smith | Problem Fixed | Software | Restoration of network settings | For a few days we were unable to access ds-proto-daq
remotely. We were also unable to reach the
outside world from ds-proto-daq.
|
|
|
52
|
28 Oct 2019 15:10 |
Simone Stracka | Configuration | Hardware | LV for steering module and current status of CAEN mainframe | The HV board from Naples did not turn on:
Yury gave it to the CAEN guys to check and/or
bring back for replacement. |
|
|
51
|
28 Oct 2019 14:56 |
Simone Stracka | Problem | Software | Issues with network configuration for steering module | We have tried to connect the steering module
to the DAQ pc via Luigi's USB-Ethernet
adapter. |
|
|
50
|
28 Oct 2019 14:10 |
Ben Smith | Problem Fixed | Software | Converters installed in VME crate | > V1725 board #0 logic level is set to TTL
(boards #1, #2, #3 to NIM)
|
|
|
49
|
28 Oct 2019 08:33 |
Ben Smith | Problem Fixed | Software | Need python3 package tkinter on DAQ pc | I have installed the python3-tkinter package
from yum. I checked that "import tkinter"
works from a python3 prompt. |
|