HW-Time-Slice Firmware-Filter Software vx2740 Steering Module Reports MVM MVM Vexos MVM-Bug listing MVM TRIUMF Local DS Prototype DS Cryogenic For Shifters BCIT-31 ChronoBox Run Operation DS-DAQ
  CERN DS-Proto0 read-only backup  Not logged in ELOG logo
 List  |  Find  |  Help 
Entry  27 Oct 2019 06:08, Simone Stracka, Configuration, Hardware, Converters installed in VME crate PDMadcCh.pngconverters.jpgadc0_ttl.jpg
    Reply  28 Oct 2019 14:10, Ben Smith, Problem Fixed, Software, Converters installed in VME crate 
Message ID: 50     Entry time: 28 Oct 2019 14:10     In reply to: 47
Author: Ben Smith 
Type: Problem Fixed 
Category: Software 
Subject: Converters installed in VME crate  
> V1725 board #0 logic level is set to TTL (boards #1, #2, #3 to NIM) 

There was a problem with CMakeLists for the V1725 driver, and the frontend was only connecting to 1 board. This is now fixed, and all the boards should have the same (TTL) logic level.
ELOG V3.1.4-cb3afcd8