| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
26
|
03 Apr 2019 15:31 |
Thomas | Routine | Software | test of elog | The last elog didn't go out cleanly. Modified
the elogd.cfg to point to the proxy. Try
again. |
|
|
30
|
02 Jul 2019 18:01 |
Thomas | Routine | Software | MIDAS running again | Darkside people seem to be doing some tests
at CERN next week. It looks like they aren't
going to use our DAQ (they will I think just |
|
|
46
|
26 Oct 2019 07:33 |
Sam Hill | Problem | Software | Test of IV Script | People: Simone, Sam, Tom, Edgar
Tested IV curve python script that
runs using MIDAS. Measured resistance consistant |
|
|
48
|
28 Oct 2019 06:28 |
Simone Stracka | Problem | Software | Need python3 package tkinter on DAQ pc | We need python3 package tkinter installed
on ds-proto-daq in order to run the steering
module GUI. |
|
|
49
|
28 Oct 2019 08:33 |
Ben Smith | Problem Fixed | Software | Need python3 package tkinter on DAQ pc | I have installed the python3-tkinter package
from yum. I checked that "import tkinter"
works from a python3 prompt. |
|
|
50
|
28 Oct 2019 14:10 |
Ben Smith | Problem Fixed | Software | Converters installed in VME crate | > V1725 board #0 logic level is set to TTL
(boards #1, #2, #3 to NIM)
|
|
|
51
|
28 Oct 2019 14:56 |
Simone Stracka | Problem | Software | Issues with network configuration for steering module | We have tried to connect the steering module
to the DAQ pc via Luigi's USB-Ethernet
adapter. |
|
|
53
|
01 Nov 2019 06:07 |
Ben Smith | Problem Fixed | Software | Restoration of network settings | For a few days we were unable to access ds-proto-daq
remotely. We were also unable to reach the
outside world from ds-proto-daq.
|
|
|
54
|
01 Nov 2019 06:15 |
Ben Smith | Problem Fixed | Software | Restoration of elog | After booting, the elog was only showing logs
from before July, and was missing the "For
Shifters" category. It appears we were loading |
|
|
66
|
04 Nov 2019 07:57 |
Ben Smith | Configuration | Software | Package installations | This morning I installed the xrootd-client
and python3-devel packages from yum. For
the latter to work, I needed to do a yum |
|
|
68
|
04 Nov 2019 08:03 |
Ben Smith | Routine | Software | New script for setting self-trigger thresholds | I have created a new script that simplifies
the adjustment of self-trigger thresholds
(e.g. to change between "noise" runs with |
|
|
74
|
05 Nov 2019 05:43 |
Ben Smith | Routine | Software | New script to equalize baselines | I've written a new script that will set all
the V1725 baselines to the same level, by
adjusting the DAC values. All the baselines |
|
|
95
|
08 Nov 2019 02:21 |
Ben Smith | Problem Fixed | Software | Increased max waveform length that we can take | I've increased various thresholds so that
we can now take 3000us (3ms) waveforms.
|
|
|
96
|
08 Nov 2019 02:31 |
Ben Smith | Routine | Software | New "run type" selection page | I made a new page that makes it easier to
switch between laser/noise/physics runs.
|
|
|
126
|
13 Nov 2019 08:15 |
Ben Smith | Routine | Software | Don't worry about "Param Not Found Type" error messages | When we start the HV program (CAEN_SY4527),
it spews error messages of the form:
"16:58:30.035 2019/11/13 [CAEN_SY4527,ERROR] |
|
|
149
|
16 Mar 2020 14:21 |
Ben Smith | Configuration | Software | New CAEN HV frontend | A few months ago I created a new midas frontend
for CAEN HV crates. It behaves more like
what users expect - changes made through |
|
|
9
|
31 Jan 2019 15:18 |
Pierre | Configuration | Trigger | Trigger rate | Somehow the trigger rate was not matching
the trigger source.
Find out that Link 3 was not collecting and |
|
|
18
|
06 Mar 2019 15:10 |
Thomas, Pierre | Routine | Trigger | Setup of chronobox | Summary of setup of chronobox on network (mostly
done by Pierre):
|
|
|
19
|
06 Mar 2019 18:19 |
Bryerton Shaw | Routine | Trigger | Setup of chronobox | The SDcard is currently required for operation
of the device, the ext3/4 filesystem will
immediately fail upon removal.
|
|
|
20
|
11 Mar 2019 12:30 |
Thomas | Routine | Trigger | New chronobox firmware; run start/stop implemented | a) Bryerton implemented new version of the
firmware. New features:
|
|