ID |
Date |
Author |
Type |
Category |
Subject |
Text |
|
58
|
01 Nov 2019 09:49 |
Alex Kish | Configuration | Hardware | Turn off the fields | Ramp UP the fields, in 100V steps.
Nominal values:
|
|
65
|
04 Nov 2019 06:02 |
Alex Kish | Configuration | Hardware | Increased fields! | Increased drift and extraction fields.
Current settings: wire gate 5100 V, 1st ring: |
|
87
|
06 Nov 2019 05:58 |
Ben Smith | Configuration | Hardware | CAEN VME Crate DHCP | The CAEN VME crate now gets its IP address
from the ds-proto-daq DHCP server. To do
this, I set the IP address of the crate to |
|
98
|
08 Nov 2019 05:14 |
Ben Smith | Configuration | Hardware | Adding darkside01 to the network | The analysis server from Roma (darkside01)
is now connected to the local network. It
is not yet connected to CERN.
|
|
99
|
08 Nov 2019 08:35 |
Ben Smith | Configuration | Hardware | Failed to talk to steering module from DAQ PC | I have failed to communicate with the steering
module arduino from the DAQ PC.
|
|
100
|
08 Nov 2019 09:09 |
Ben Smith | Configuration | Hardware | Adding darkside01 to the network | The cable has been fixed. Socket 0001/007
is still not active. |
|
103
|
08 Nov 2019 22:31 |
Marco | Configuration | Hardware | Adding darkside01 | Wrong MAC address fixed in CERN network
setting, now the machine is visible from
external network too: |
|
128
|
14 Nov 2019 00:09 |
Ben Smith | Problem | Hardware | Chronobox not serving human webpage | The chronobox isn't serving the human-interactive
webpage that should be visible at https://m-darkside.web.cern.ch/chronobox/
- it responds with "File not found". Oddly, |
|
67
|
04 Nov 2019 08:00 |
Ben Smith | Configuration | MIDAS | Change of location of history files | /home was getting very full on ds-proto-daq,
so I moved the history files onto the /data
disk. There is now a symlink from ~/online/history |
|
97
|
08 Nov 2019 02:48 |
Ben Smith | Configuration | MIDAS | Enabled dotfile naming in Logger | I have changed `/Logger/Channels/0/Settings/Filename`
to start with a dot, so files will be hidden
until they are complete.
|
|
105
|
09 Nov 2019 07:29 |
Marco Rescigno | Problem Fixed | MIDAS | this morning problem | frontend process still alive but slow,
causing lot of rejected triggers.
stopped and restarted the feov1725 |
|
112
|
10 Nov 2019 12:15 |
E. Sanchez | Problem | MIDAS | Problem DAQ | Error during data taking 1573416708
21:11:48.151 2019/11/10 [feov1725MTI00,INFO]
V1725 PLL loss lock Board:0 (vmeAcq=0x0) |
|
113
|
11 Nov 2019 00:37 |
Yi Wang | Problem | MIDAS | cannot connect to rootana | The connection to rootana is lost.
No data taking can be started. |
|
147
|
19 Nov 2019 04:07 |
Julie / Pascal | Routine | Other | IV curve at the end of data taking | IV of 25 SiPM put in ivdata_191119 directory |
|
150
|
08 Sep 2020 12:46 |
Ben Smith | Configuration | Other | New backup ELOG location | I have added a backup of the CERN proto-0
ELOG at TRIUMF, in case ds-proto-daq is unavailable
in future.
|
|
1
|
11 Dec 2018 15:17 |
Thomas | Configuration | Software | Setup elog for ds-proto-daq |
1) Install and tweak elog:
|
|
2
|
11 Dec 2018 15:20 |
Thomas | Configuration | Software | Setup elog for ds-proto-daq |
1) Install and tweak elog:
|
|
8
|
28 Jan 2019 01:44 |
Thoms | Routine | Software | Added web display of V1725 waveforms | I added javascript webdisplay of the V1725
waveforms to the Darkside setup. You can
see the waveform display here:
|
|
11
|
07 Feb 2019 17:30 |
Thomas | Routine | Software | Testing the maximum data throughput | First check the maximum trigger rate and maximum
data rate for different sample lengths (for
each channels):
|
|
25
|
03 Apr 2019 15:11 |
Thomas | Routine | Software | CERN SSO proxy for ds-proto-daq | Pierre and I got the CERN proxy setup for
the Darkside prototype.
|
|