HW-Time-Slice
Firmware-Filter
Software
vx2740
Steering Module
Reports
MVM
MVM Vexos
MVM-Bug listing
MVM TRIUMF Local
DS Prototype
DS Cryogenic
For Shifters
BCIT-31
ChronoBox
Run Operation
DS-DAQ
|
CERN DS-Proto0 read-only backup |
Not logged in |
|
|
|
Message ID: 18
Entry time: 06 Mar 2019 15:10
Reply to this: 19
|
Author: |
Thomas, Pierre |
Type: |
Routine |
Category: |
Trigger |
Subject: |
Setup of chronobox |
|
|
Summary of setup of chronobox on network (mostly done by Pierre):
1) Hook up USB connection from chronobox to ds-proto-daq. Start serial-USB connection by doing
/home/dsproto/online/dsproto_daq/serialusb
can login through serial link. Added the ssh key for dsproto@ds-proto-daq to the authorized_keys file on
chronobox linux.
ctrl-a, ctrl-x to stop picocom
2) On ds-proto-daq, setup dhcpd server. Configuration in this file
/etc/dhcp/dhcpd.conf
dhpcd is bond to the second NIC only. Configure DHCP to give IP 192.168.1.3 to chronobox. In /etc/hosts set
192.168.1.3 to have hostname chronobox
Power cycle chronobox; it successfully gets IP:
[dsproto@ds-proto-daq dsproto_daq]$ ping chronobox
PING chronobox (192.168.1.3) 56(84) bytes of data.
64 bytes from chronobox (192.168.1.3): icmp_seq=1 ttl=64 time=0.180 ms
3) Can see the chronobox webpage locally as
http://chronobox:8080
4) Some esper tool to access data: did following to setup esper
734 yum install python2-pip
735 pip install esper-tool
736 yum install ncurses
738 yum install ncurses-devel
739 pip install esper-tool
Can then connect to the chronobox by doing
esper-tool interactive http://chronobox:8080
This is as much as I understand at this point... more exploring now...
5) Pierre unplugged the SD card to take it back to Bryerton's room. But I guess this was bad.
lots of errors on serialUSB link now and the webpage doesn't work anymore:
[ 1246.665269] blk_partition_remap: fail for partition 2
Jan 1 00:20:46 buildroot user.warn kernel: [ 1242.904770] EXT4-fs error: 339 callbacks suppressed
[ 1246.679162] blk_partition_remap: fail for partition 2
Jan 1 00:20:46 buildroot user.crit kernel: [ 1242.904780] EXT4-fs error (device mmcblk0p2):
ext4_find_entry:1437: inode #2: com[ 1246.692884] blk_partition_remap: fail for partition 2
m syslogd: reading directory lblock 0
[ 1246.709020] blk_partition_remap: fail for partition 2
Jan 1 00:20:46 buildroot user.warn kernel: [ 1242.929199] blk_partition_remap: fail for partition 2
[ 1246.717394] blk_partition_remap: fail for partition 2
Jan 1 00:20:46 buildroot user.crit kernel: [ 1242.942971] EXT4-fs error (device mmcblk0p2):
ext4_find_entry:1437: inode #2: com[ 1246.731255] blk_partition_remap: fail for partition 2
m syslogd: reading directory lblock 0
Jan 1 00:20:46 buildroot user.warn kernel: [ 1242.953760] blk_partition_remap: fail for [ 1246.747337]
blk_partition_remap: fail for partition 2
partition 2
Jan 1 00:20:46 buildroot user.crit kernel: [ 1242.967532] EXT4-fs error (device mmcblk0p2):
ext4_find_entry:1437: [ 1246.763481] blk_partition_remap: fail for partition 2
inode #2: comm syslogd: reading directory lblock 0
Jan 1 00:20:46 buildroot user.warn kernel: [ 1242.978320] blk_partition_rem[ 1246.779511] blk_partition_remap:
fail for partition 2
ap: fail for partition 2
Jan 1 00:20:46 buildroot user.crit kernel: [ 1242.992091] EXT4-fs error (device mmcblk0p2): ext4_find[
1246.795586] blk_partition_remap: fail for partition 2
_entry:1437: inode #2: comm syslogd: reading directory lblock 0
Jan 1 00:20:46 buildroot user.warn kernel: [ 1243.002885] blk_[ 1246.811671] blk_partition_remap: fail for
partition 2
partition_remap: fail for partition 2
Jan 1 00:20:46 buildroot user.crit kernel: [ 1243.016656] EXT4-fs error (device mmcblk0p[ 1246.827750]
blk_partition_remap: fail for partition 2 |