ID |
Date |
Author |
Type |
Category |
Subject |
Text |
|
99
|
08 Nov 2019 08:35 |
Ben Smith | Configuration | Hardware | Failed to talk to steering module from DAQ PC | I have failed to communicate with the steering
module arduino from the DAQ PC.
|
|
100
|
08 Nov 2019 09:09 |
Ben Smith | Configuration | Hardware | Adding darkside01 to the network | The cable has been fixed. Socket 0001/007
is still not active. |
|
103
|
08 Nov 2019 22:31 |
Marco | Configuration | Hardware | Adding darkside01 | Wrong MAC address fixed in CERN network
setting, now the machine is visible from
external network too: |
|
149
|
16 Mar 2020 14:21 |
Ben Smith | Configuration | Software | New CAEN HV frontend | A few months ago I created a new midas frontend
for CAEN HV crates. It behaves more like
what users expect - changes made through |
|
150
|
08 Sep 2020 12:46 |
Ben Smith | Configuration | Other | New backup ELOG location | I have added a backup of the CERN proto-0
ELOG at TRIUMF, in case ds-proto-daq is unavailable
in future.
|
|
12
|
08 Feb 2019 12:08 |
Thomas | Problem | Hardware | Installed Marco's A3818; didn't work | I installed Marco's A3818 PCIe card. Didn't
seem to work. I got communication errors
talking to link 2. The
|
|
13
|
13 Feb 2019 16:45 |
Pierre | Problem | Hardware | A3818 from Marco | Checking again Marco's A3818:
- Port #2 (third from top of card) is acting
up.
|
|
33
|
12 Jul 2019 02:05 |
Marco Rescigno | Problem | Trigger | MB1 test in proto-0 setup/1 | Tried to get laser sync signal into chronobox
(clkin1 input), apparently all triggers dropped
by chronobox |
|
40
|
16 Jul 2019 02:41 |
Marco Rescigno | Problem | Trigger | Busy handling | This morning tried to get some data with
Vbias=65 V, which seems better for the SiPM
in MB1. |
|
46
|
26 Oct 2019 07:33 |
Sam Hill | Problem | Software | Test of IV Script | People: Simone, Sam, Tom, Edgar
Tested IV curve python script that
runs using MIDAS. Measured resistance consistant |
|
48
|
28 Oct 2019 06:28 |
Simone Stracka | Problem | Software | Need python3 package tkinter on DAQ pc | We need python3 package tkinter installed
on ds-proto-daq in order to run the steering
module GUI. |
|
51
|
28 Oct 2019 14:56 |
Simone Stracka | Problem | Software | Issues with network configuration for steering module | We have tried to connect the steering module
to the DAQ pc via Luigi's USB-Ethernet
adapter. |
|
112
|
10 Nov 2019 12:15 |
E. Sanchez | Problem | MIDAS | Problem DAQ | Error during data taking 1573416708
21:11:48.151 2019/11/10 [feov1725MTI00,INFO]
V1725 PLL loss lock Board:0 (vmeAcq=0x0) |
|
113
|
11 Nov 2019 00:37 |
Yi Wang | Problem | MIDAS | cannot connect to rootana | The connection to rootana is lost.
No data taking can be started. |
|
117
|
11 Nov 2019 10:05 |
Sam Hill | Problem | General | Evening data taking | Attemted the following run, and
it started but the rate was shoing 0 and
it got stuck on 5 events |
|
119
|
12 Nov 2019 00:16 |
Yi Wang | Problem | Digitizer | V1725 error, runs keep crashing | 09:15:33.955 2019/11/12 [feov1725MTI00,ERROR]
[feoV1725.cxx:663:link_thread,ERROR] Exiting
thread 3 with error |
|
120
|
12 Nov 2019 00:23 |
Ben Smith | Problem | Digitizer | V1725 error, runs keep crashing | It looks like there's a memory leak in the
high voltage driver, and we were running
out of memory (using a lot of swap). That |
|
128
|
14 Nov 2019 00:09 |
Ben Smith | Problem | Hardware | Chronobox not serving human webpage | The chronobox isn't serving the human-interactive
webpage that should be visible at https://m-darkside.web.cern.ch/chronobox/
- it responds with "File not found". Oddly, |
|
49
|
28 Oct 2019 08:33 |
Ben Smith | Problem Fixed | Software | Need python3 package tkinter on DAQ pc | I have installed the python3-tkinter package
from yum. I checked that "import tkinter"
works from a python3 prompt. |
|
50
|
28 Oct 2019 14:10 |
Ben Smith | Problem Fixed | Software | Converters installed in VME crate | > V1725 board #0 logic level is set to TTL
(boards #1, #2, #3 to NIM)
|
|