| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
151
|
14 Oct 2020 08:39 |
Tom Thorpe | Routine | General | Log regarding MB2 removal from Proto-0 | Drive folder with data files and some pictures: https://drive.google.com/drive/folders/1Sr27kQTOO2kciBY7v-wYBP06tWLVEjiP
Lab notes @ CERN
11/10/2020 |
|
|
49
|
28 Oct 2019 08:33 |
Ben Smith | Problem Fixed | Software | Need python3 package tkinter on DAQ pc | I have installed the python3-tkinter package
from yum. I checked that "import tkinter"
works from a python3 prompt. |
|
|
50
|
28 Oct 2019 14:10 |
Ben Smith | Problem Fixed | Software | Converters installed in VME crate | > V1725 board #0 logic level is set to TTL
(boards #1, #2, #3 to NIM)
|
|
|
53
|
01 Nov 2019 06:07 |
Ben Smith | Problem Fixed | Software | Restoration of network settings | For a few days we were unable to access ds-proto-daq
remotely. We were also unable to reach the
outside world from ds-proto-daq.
|
|
|
54
|
01 Nov 2019 06:15 |
Ben Smith | Problem Fixed | Software | Restoration of elog | After booting, the elog was only showing logs
from before July, and was missing the "For
Shifters" category. It appears we were loading |
|
|
89
|
06 Nov 2019 12:28 |
Ben Smith | Problem Fixed | General | Evening data taking, purity check | > Not sure if the trigger threshold is correctly
set, there is an error:
|
|
|
95
|
08 Nov 2019 02:21 |
Ben Smith | Problem Fixed | Software | Increased max waveform length that we can take | I've increased various thresholds so that
we can now take 3000us (3ms) waveforms.
|
|
|
105
|
09 Nov 2019 07:29 |
Marco Rescigno | Problem Fixed | MIDAS | this morning problem | frontend process still alive but slow,
causing lot of rejected triggers.
stopped and restarted the feov1725 |
|
|
114
|
11 Nov 2019 00:47 |
Yi / Edgar | Problem Fixed | Digitizer | Problem fixed by restarting the VME crate | |
|
|
118
|
11 Nov 2019 23:57 |
Yi Wang | Problem Fixed | Trigger | ID 117 problem is fixed | The problem reported in ID 117 is somehow
fixed this morning. |
|
|
12
|
08 Feb 2019 12:08 |
Thomas | Problem | Hardware | Installed Marco's A3818; didn't work | I installed Marco's A3818 PCIe card. Didn't
seem to work. I got communication errors
talking to link 2. The
|
|
|
13
|
13 Feb 2019 16:45 |
Pierre | Problem | Hardware | A3818 from Marco | Checking again Marco's A3818:
- Port #2 (third from top of card) is acting
up.
|
|
|
33
|
12 Jul 2019 02:05 |
Marco Rescigno | Problem | Trigger | MB1 test in proto-0 setup/1 | Tried to get laser sync signal into chronobox
(clkin1 input), apparently all triggers dropped
by chronobox |
|
|
40
|
16 Jul 2019 02:41 |
Marco Rescigno | Problem | Trigger | Busy handling | This morning tried to get some data with
Vbias=65 V, which seems better for the SiPM
in MB1. |
|
|
46
|
26 Oct 2019 07:33 |
Sam Hill | Problem | Software | Test of IV Script | People: Simone, Sam, Tom, Edgar
Tested IV curve python script that
runs using MIDAS. Measured resistance consistant |
|
|
48
|
28 Oct 2019 06:28 |
Simone Stracka | Problem | Software | Need python3 package tkinter on DAQ pc | We need python3 package tkinter installed
on ds-proto-daq in order to run the steering
module GUI. |
|
|
51
|
28 Oct 2019 14:56 |
Simone Stracka | Problem | Software | Issues with network configuration for steering module | We have tried to connect the steering module
to the DAQ pc via Luigi's USB-Ethernet
adapter. |
|
|
112
|
10 Nov 2019 12:15 |
E. Sanchez | Problem | MIDAS | Problem DAQ | Error during data taking 1573416708
21:11:48.151 2019/11/10 [feov1725MTI00,INFO]
V1725 PLL loss lock Board:0 (vmeAcq=0x0) |
|
|
113
|
11 Nov 2019 00:37 |
Yi Wang | Problem | MIDAS | cannot connect to rootana | The connection to rootana is lost.
No data taking can be started. |
|
|
117
|
11 Nov 2019 10:05 |
Sam Hill | Problem | General | Evening data taking | Attemted the following run, and
it started but the rate was shoing 0 and
it got stuck on 5 events |
|