| ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
13
|
13 Feb 2019 16:45 |
Pierre | Problem | Hardware | A3818 from Marco | Checking again Marco's A3818:
- Port #2 (third from top of card) is acting
up.
|
|
|
6
|
17 Jan 2019 15:47 |
Thomas | Routine | Hardware | Added raided HD to ds-proto-daq | Added pair of 10TB hard-drives in raid-1 to
ds-proto-daq. MIDAS data files will get
written to this raid volume.
|
|
|
8
|
28 Jan 2019 01:44 |
Thoms | Routine | Software | Added web display of V1725 waveforms | I added javascript webdisplay of the V1725
waveforms to the Darkside setup. You can
see the waveform display here:
|
|
|
103
|
08 Nov 2019 22:31 |
Marco | Configuration | Hardware | Adding darkside01 | Wrong MAC address fixed in CERN network
setting, now the machine is visible from
external network too: |
|
|
98
|
08 Nov 2019 05:14 |
Ben Smith | Configuration | Hardware | Adding darkside01 to the network | The analysis server from Roma (darkside01)
is now connected to the local network. It
is not yet connected to CERN.
|
|
|
100
|
08 Nov 2019 09:09 |
Ben Smith | Configuration | Hardware | Adding darkside01 to the network | The cable has been fixed. Socket 0001/007
is still not active. |
|
|
110
|
10 Nov 2019 11:18 |
Edgar Sanchez | Routine | General | Afternoon system monitoring | Run 1050
Gas pocket: ON
(unknow) |
|
|
122
|
12 Nov 2019 09:22 |
Edgar Sanchez | Routine | General | Afternoon system monitoring | Run 1090
Gas pocket: ON
(thinkness 7mm) |
|
|
123
|
12 Nov 2019 09:30 |
Edgar Sanchez | Routine | General | Afternoon system monitoring | Run 1092
Gas pocket: ON
(thinkness 7mm) |
|
|
116
|
11 Nov 2019 09:31 |
Sam Hill | Routine | General | Afternoon system monitoring: IV curves and Dewar refill | 17:30
Took a set of IV curves using 0.5V
steps from 30-50V and 0.05 steps above 50V. |
|
|
133
|
14 Nov 2019 08:14 |
Ben Smith | Routine | General | Automatic copying to darkside01 | I have set up automatic copying of data from
ds-proto-daq to darkside01, using the lazy
logger.
|
|
|
40
|
16 Jul 2019 02:41 |
Marco Rescigno | Problem | Trigger | Busy handling | This morning tried to get some data with
Vbias=65 V, which seems better for the SiPM
in MB1. |
|
|
87
|
06 Nov 2019 05:58 |
Ben Smith | Configuration | Hardware | CAEN VME Crate DHCP | The CAEN VME crate now gets its IP address
from the ds-proto-daq DHCP server. To do
this, I set the IP address of the crate to |
|
|
25
|
03 Apr 2019 15:11 |
Thomas | Routine | Software | CERN SSO proxy for ds-proto-daq | Pierre and I got the CERN proxy setup for
the Darkside prototype.
|
|
|
22
|
27 Mar 2019 08:57 |
Pierre | Configuration | Hardware | CERN setup | Found that the Trigger out from the CB is
on output1
Trigger / Not used
|
|
|
67
|
04 Nov 2019 08:00 |
Ben Smith | Configuration | MIDAS | Change of location of history files | /home was getting very full on ds-proto-daq,
so I moved the history files onto the /data
disk. There is now a symlink from ~/online/history |
|
|
128
|
14 Nov 2019 00:09 |
Ben Smith | Problem | Hardware | Chronobox not serving human webpage | The chronobox isn't serving the human-interactive
webpage that should be visible at https://m-darkside.web.cern.ch/chronobox/
- it responds with "File not found". Oddly, |
|
|
47
|
27 Oct 2019 06:08 |
Simone Stracka | Configuration | Hardware | Converters installed in VME crate | People: Edgar, Simone
Installed differential to single-ended
converters in VME crate, and turned crate |
|
|
50
|
28 Oct 2019 14:10 |
Ben Smith | Problem Fixed | Software | Converters installed in VME crate | > V1725 board #0 logic level is set to TTL
(boards #1, #2, #3 to NIM)
|
|
|
5
|
11 Jan 2019 11:07 |
Thomas | Routine | Digitizer | Data corruption for ADC channels | I modified the analyzer so that it shows data
from all four modules.
|
|