ID |
Date |
Author |
Type |
Category |
Subject |
Text |
|
143
|
18 Nov 2019 07:20 |
Ben Smith | Routine | General | Disk cleanup | Lazy logger has caught up with the backlog,
and continues to transfer new files to darkside01
as they are written.
|
|
126
|
13 Nov 2019 08:15 |
Ben Smith | Routine | Software | Don't worry about "Param Not Found Type" error messages | When we start the HV program (CAEN_SY4527),
it spews error messages of the form:
"16:58:30.035 2019/11/13 [CAEN_SY4527,ERROR] |
|
136
|
16 Nov 2019 01:57 |
Yi Wang | Routine | General | Dual phase data taking proposed by Marco | Run 1186
Gas pocket: ON
(thinkness 7mm) |
|
97
|
08 Nov 2019 02:48 |
Ben Smith | Configuration | MIDAS | Enabled dotfile naming in Logger | I have changed `/Logger/Channels/0/Settings/Filename`
to start with a dot, so files will be hidden
until they are complete.
|
|
106
|
09 Nov 2019 09:39 |
Sam Hill | Routine | General | Evening data taking | Run 1016
Gas pocket: ON
(thinkness 7mm) |
|
117
|
11 Nov 2019 10:05 |
Sam Hill | Problem | General | Evening data taking | Attemted the following run, and
it started but the rate was shoing 0 and
it got stuck on 5 events |
|
127
|
13 Nov 2019 09:24 |
Xiang Xiao | Routine | General | Evening data taking | Run 1105
Gas pocket: ON
(thinkness 7mm) |
|
88
|
06 Nov 2019 11:22 |
Yi Wang | Routine | General | Evening data taking, purity check | Not sure if the trigger threshold is correctly
set, there is an error:
Traceback (most recent call last): |
|
89
|
06 Nov 2019 12:28 |
Ben Smith | Problem Fixed | General | Evening data taking, purity check | > Not sure if the trigger threshold is correctly
set, there is an error:
|
|
10
|
06 Feb 2019 14:12 |
Pierre | Configuration | Hardware | Extended Trigger Time Tag (ETTT) | Confirmed this ETTT configuration is working.
ETTT Enabled [22..21] |
|
99
|
08 Nov 2019 08:35 |
Ben Smith | Configuration | Hardware | Failed to talk to steering module from DAQ PC | I have failed to communicate with the steering
module arduino from the DAQ PC.
|
|
27
|
08 Apr 2019 08:31 |
Thomas | Routine | General | General work - day 1 at CERN | Notes on day:
1) Fixed the problem with the network interfaces. |
|
28
|
10 Apr 2019 05:40 |
Thomas | Routine | General | General work - day 3 at CERN | Several points:
1) Gave a series of tutorial on DAQ to DS |
|
118
|
11 Nov 2019 23:57 |
Yi Wang | Problem Fixed | Trigger | ID 117 problem is fixed | The problem reported in ID 117 is somehow
fixed this morning. |
|
148
|
20 Nov 2019 04:47 |
Sam Hill | Routine | General | IV Curve - warming up | Temp at start:
A: 242.7K B: 278.16K
C: 86.4K D: 240.89K |
|
147
|
19 Nov 2019 04:07 |
Julie / Pascal | Routine | Other | IV curve at the end of data taking | IV of 25 SiPM put in ivdata_191119 directory |
|
65
|
04 Nov 2019 06:02 |
Alex Kish | Configuration | Hardware | Increased fields! | Increased drift and extraction fields.
Current settings: wire gate 5100 V, 1st ring: |
|
95
|
08 Nov 2019 02:21 |
Ben Smith | Problem Fixed | Software | Increased max waveform length that we can take | I've increased various thresholds so that
we can now take 3000us (3ms) waveforms.
|
|
12
|
08 Feb 2019 12:08 |
Thomas | Problem | Hardware | Installed Marco's A3818; didn't work | I installed Marco's A3818 PCIe card. Didn't
seem to work. I got communication errors
talking to link 2. The
|
|
16
|
05 Mar 2019 14:20 |
Thomas | Routine | Hardware | Installed network card | I installed a PCIe 1Gbps network card and
configured it as a private network. The
PC (ds-proto-daq) is
|
|