 07 Nov 2019 02:07, Yi/Marco/Andrea, Routine, General, morning data taking, purity check
|
Run 956
Gas pocket: ON (thickness 7mm)
Fields: drift 200 V/cm, extraction 2.8 kV/cm |
|
14 Nov 2019 04:03, Yi/Edgar/Sam, Routine, General, Noise data taking
|
Run 1121
Gas pocket: OFF
Fields: OFF |
|
05 Nov 2019 04:48, Yi Wang, Routine, General, Run 873
|
Gas pocket: ON (thinkness unknown, since the TPC pressure is >200 mbar)
Fields: drift 500V/cm extraction 3.78kV/cm
Threshold: 1600 ADC below baseline |
|
05 Nov 2019 04:57, Yi Wang, Routine, General, Run 875
|
Gas pocket: ON (thinkness unknown, since the TPC pressure is >200 mbar)
Fields: OFF
Threshold: 1600 ADC below baseline |
|
05 Nov 2019 05:09, Yi Wang, Routine, General, Run 877
|
Gas pocket: ON (thinkness unknown, since the TPC pressure is >200 mbar)
Fields: drift 200 V/cm, extraction 2.8 kV/cm
Threshold: 1600 ADC below baseline |
|
05 Nov 2019 23:58, Yi Wang, Routine, General, Morning data taking, purity check
|
Run 917
Gas pocket: ON (thinkness 7mm)
Fields: drift 200 V/cm, extraction 2.8 kV/cm |
|
06 Nov 2019 11:22, Yi Wang, Routine, General, Evening data taking, purity check
|
Not sure if the trigger threshold is correctly set, there is an error:
Traceback (most recent call last):
File "/home/dsproto/online/dsproto_analyzer/threshold_tool.py", line 71, in <module> |
|
07 Nov 2019 23:48, Yi Wang, Routine, General, morning data taking
|
Run 973
Gas pocket: ON (thinkness 7mm)
Fields: drift 200 V/cm, extraction 3.78 kV/cm |
|
10 Nov 2019 00:06, Yi Wang, Routine, General, morning data taking
|
Run 1022
Gas pocket: ON (thinkness 7mm)
Fields: drift 500 V/cm, extraction 3.78 kV/cm |
|
11 Nov 2019 00:37, Yi Wang, Problem, MIDAS, cannot connect to rootana
|
The connection to rootana is lost.
No data taking can be started. |
|
11 Nov 2019 23:57, Yi Wang, Problem Fixed, Trigger, ID 117 problem is fixed
|
| The problem reported in ID 117 is somehow fixed this morning. |
|
12 Nov 2019 00:16, Yi Wang, Problem, Digitizer, V1725 error, runs keep crashing
|
| 09:15:33.955 2019/11/12 [feov1725MTI00,ERROR] [feoV1725.cxx:663:link_thread,ERROR] Exiting thread 3 with error |
|
12 Nov 2019 00:24, Yi Wang, Routine, General, Morning data taking
|
Run 1084
Gas pocket: ON (thinkness 7mm)
Fields: drift 200 V/cm, extraction 3.78 kV/cm |
|
13 Nov 2019 00:08, Yi Wang, Routine, General, Morning data taking
|
Run 1099
Gas pocket: ON (thinkness 7mm)
Fields: drift 200 V/cm, extraction 3.78 kV/cm |
|
15 Nov 2019 00:19, Yi Wang, Routine, General, Laser run
|
Run 1166 Laser run
Chronobox: External trigger Enable
Chronobox: Enable Channel [ch_enable]: 0x00000000 |
|
16 Nov 2019 01:57, Yi Wang, Routine, General, Dual phase data taking proposed by Marco
|
Run 1186
Gas pocket: ON (thinkness 7mm)
Fields: drift 200 V/cm, extraction 2.8 kV/cm |
17 Nov 2019 00:48, Yi Wang, Routine, General, dual phase data taking 
|
Run 1197
Gas pocket: ON (thinkness 7mm)
Fields: drift 200 V/cm, extraction 2.8 kV/cm |
|
17 Nov 2019 02:23, Yi Wang, Routine, General, dual phase data taking
|
Noise problem seems like fixed after remaking the Al foil cover.
Run 1208
Gas pocket: ON (thinkness 9mm) |
|
11 Nov 2019 00:47, Yi / Edgar, Problem Fixed, Digitizer, Problem fixed by restarting the VME crate
|
| |
|
11 Nov 2019 01:12, Yi / Edgar, Routine, General, Morning data taking
|
Run 1065
Gas pocket: ON (thinkness 7mm)
Fields: drift 200 V/cm, extraction 3.78 kV/cm |
|