| | |
| allControlsDestroy [win32] | destroys all the controls in a dialog or window |
| applicationRegistryPathSet [win32] | sets the path where the persistent state of this application should be saved |
| applicationReturnCodeSet [win32] | sets the return code for the application |
| applicationTitleSet [win32] | sets the title of the application |
| autoscale | automatically scale vxWorks |
| autoTimerCallbackGet [win32] | see `windowTimerCallbackGet' |
| autoTimerCallbackSet [win32] | see 'windowTimerCallbackSet' |
| averageCharSizeGet [win32] | retrieves the average character size of a window |
| | |
| bindNamesToList [Tcl] | create variables in the caller that are bound to list values |
| bkendCacheTextUpdate( ) | update the instruction cache |
| bkendContextCont( ) | continue a context |
| bkendContextCreate( ) | create a context |
| bkendContextKill( ) | destroy a context |
| bkendContextResume( ) | resume a context |
| bkendContextStatusGet( ) | get a context status |
| bkendContextStep( ) | single step a context |
| bkendContextSuspend( ) | suspend a context |
| bkendDirectCall( ) | call a target function synchronously |
| bkendEventGet( ) | get an event from the target |
| bkendEventpointAdd( ) | add an event point |
| bkendEventpointDelete( ) | delete an event point |
| bkendEvtPending( ) | check if an event is pending |
| bkendFlagsGet( ) | Get the supported flags for this backend |
| bkendFreeResultArgs( ) | free the memory used by the returned structure |
| bkendFuncCall( ) | call a target function asynchronously |
| bkendGopherEval( ) | evaluate a Gopher string |
| bkendInitialize( ) | initialize the back end |
| bkendLog( ) | log a request exchanged between the target server back end and the target |
| bkendMemChecksum( ) | perform a checksum on target memory |
| bkendMemFill( ) | fill target memory with a pattern |
| bkendMemMove( ) | move a block of target memory |
| bkendMemProtect( ) | write protect (or write enable) target memory |
| bkendMemRead( ) | read target memory |
| bkendMemScan( ) | scan target memory for a pattern |
| bkendMemWrite( ) | write target memory |
| bkendModeGet( ) | get the debugging mode |
| bkendModeSet( ) | set the debugging mode |
| bkendRegsGet( ) | get target register value(s) |
| bkendRegsSet( ) | set target register value(s) |
| bkendTgtConnect( ) | connect to the target |
| bkendTgtDisconnect( ) | disconnect from the target |
| bkendTgtPing( ) | ping the target |
| bkendVIOWrite( ) | write data to a target virtual I/O channel |
| | |
| chartCreate | create a new Tcl chart |
| chartDestroy | destroy a chart |
| chartPost | post a chart |
| chartSetQuantities | establish a set of quantities to display in a chart |
| chartSetValues | set the values of the quantities contained in a chart |
| chartTitleSet | set the title of a chart window |
| chartUnpost | removed a chart from the display |
| cmpAdd | add components to vxWorks |
| cmpBuild | build the project |
| cmpBuildFlagsAdd | add flags to the build |
| cmpBuildMacroGet | get a build macro |
| cmpBuildMacroSet | set a build macro |
| cmpBuildRuleSet | set the build rule for the project |
| cmpBuildSpecCreate | create a new buildSpec |
| cmpBuildSpecSet | set the active buildSpec |
| cmpFileAdd | add a file to the project |
| cmpFileListGet | get a list of files in the project |
| cmpFileRemove | remove a file from the project |
| cmpInfo | get info about a set of components |
| cmpListGet | get a list of components in vxWorks |
| cmpLoad | dynamically load components |
| cmpParamGet | get a parameter |
| cmpParamSet | set a parameter in the current project |
| cmpProjClose | close the currently open project |
| cmpProjCopy | create a copy of an existing project and open it |
| cmpProjCreate | create a project and open it |
| cmpProjDelete | delete the currently open project |
| cmpProjHandleGet | get the handle to the currently open project |
| cmpProjOpen | open a project |
| cmpRemove | remove components from vxWorks |
| cmpTest | test the component descriptor files for errors |
| cmpUnavailListGet | list unavailable components |
| cmpValidate | validate the component configuration |
| configStatusSet | set the configuration status bar to the given string |
| controlCallbackGet [win32] | retrieves the Tcl script (if any) established to process events for a control |
| controlCallbackSet [win32] | sets a Tcl script to process events for a control in a dialog or window |
| controlChecked [win32] | retrieves the check state of a control in a window or dialog |
| controlCheckSet [win32] | checks a control in a window or dialog |
| controlContextMenuShow [win32] | show the specified context menu. |
| controlCreate [win32] | creates a control in a Tcl window, dialog, or toolbar |
| controlDestroy [win32] | destroys a control in a dialog or window |
| controlEnable [win32] | enables or disables a control in a dialog or window |
| controlEnabled [win32] | retrieves the enabled state of a control in a dialog or window |
| controlEventGet [win32] | returns the most recent event that has occured on a control |
| controlExists [win32] | determines whether a particular control exists in a dialog or window |
| controlExpandingItemGet [win32] | gets information about the currently expanding item of a treelist control. |
| controlFocusSet [win32] | sets focus to a control in a dialog or window |
| controlHandleGet [win32] | returns the handle of a tcl control |
| controlHelpIDSet [win32] | sets the help ID to be used for the named control in a dialog or window |
| controlHidden [win32] | retrieves the hidden state of a control in a dialog or window |
| controlHide [win32] | hides or shows a control in a dialog or window |
| controlItemDelete [win32] | delete the specified item in a control. |
| controlItemInsert [win32] | inserts the provided item into the control. |
| controlItemPropertyGet [win32] | gets the property of an item in a control |
| controlItemPropertySet [win32] | sets the value of the specified property. |
| controlLockUpdate [win32] | locks the updating of the control. |
| controlParentSet [win32] | sets the specifed window as the parent of the control. |
| controlPositionGet [win32] | retrieves the position of a control |
| controlPositionSet [win32] | sets the position of a control in a dialog or window |
| controlPropertyGet [win32] | returns the value of the specified property of a control. |
| controlPropertySet [win32] | allows to configure the control properties |
| controlSelectionGet [win32] | gets the selection in a control in a dialog or window |
| controlSelectionSet [win32] | sets the selection in a control in a dialog or window |
| controlSizeGet [win32] | retrieves the size of a control in a dialog or window |
| controlSizeSet [win32] | sets the size of a control in a dialog or window |
| controlStructureSet [win32] | sets the structure of a hierarchy (tree) control |
| controlTabsAdd [win32] | add the strings as new tabs in a tab control. |
| controlTextInsert [win32] | inserts the text into a text control. |
| controlUnlockUpdate [win32] | Unlocks all the updates on the control. |
| controlValuesGet [win32] | retrieves values of controls |
| controlValuesSet [win32] | sets the data or text of a control |
| cxrDataDocCreate | create a component xref document from .cdf files |
| cxrSizeGet | get the size of a set of components |
| cxrSubfolders | find everything under a given folder recursivly |
| cxrSubtree | what components are required by a given set of components |
| cxrSupertree | what components require a given set of components |
| | |
| delayedEval | arrange for an expression to be evaluated later |
| dialogCreate | create a new Tcl dialog |
| dialogCreate [win32] | Creates a dialog |
| dialogDestroy | destroy a dialog |
| dialogGetValue | query the value of a dialog item |
| dialogGetValues | query the values of all dialog items |
| dialogListDeselect | deselect an item in a dialog's list |
| dialogListSelect | select an item in a dialog's list |
| dialogPost | post a dialog |
| dialogSetValue | set the value of a dialog item |
| dialogSetValues | set the values of all items in a dialog |
| dialogTitleSet | set the title of a dialog window |
| dialogUnitsToPixels [win32] | conversion routine |
| dialogUnpost | remove a dialog from the display |
| dirBrowseDialogCreate [win32] | create a standard directory browser dialog |
| docWalk | walk a document |
| downtcl | request evaluation of an expression in the debugger's interpreter |
| | |
| fileDialogCreate [win32] | create a standard file browser dialog |
| flagBool( ) | interprets an argument as a boolean. |
| flagInt( ) | interprets an argument as an "integer parameter required" argument. |
| flagName( ) | interprets an argument as a "string parameter required" argument. |
| | |
| helpLaunch [win32] | start winhelp using a specified file, ID, mode, and so forth |
| hierarchyCreate | create a hierarchy window |
| hierarchyDestroy | destroy a hierarchy |
| hierarchyExists | test for the existence of a hierarchy |
| hierarchyHighlight | highlight a given node in a hierarchy |
| hierarchyIsDisplayed | check if a hierarchy window is displayed |
| hierarchyList | return a list of all existing hierarchies |
| hierarchyPost | post a hierarchy |
| hierarchySetStructure | set the structure of a hierarchy |
| hierarchySetValues | set the values of terminal nodes in a hierarchy |
| hierarchyUnhighlight | highlight a given node in a hierarchy |
| | |
| INFORMATION | WTX-protocol-requests manual layout |
| | |
| listBoxAddItems | add items to a listbox |
| listBoxDeleteAll | delete all elements in a list box |
| listBoxSelect | select an item in a list box |
| listBoxUpdateItems | supply a new list for a listbox |
| loadAlignGet( ) | determine the required alignment for an address or a size |
| loadBufferFree( ) | free a buffer previously allocated |
| loadCommonManage( ) | process a common symbol |
| loadCoreBuilderGet( ) | publish information about the tool chain |
| loadCoreBuilderSet( ) | record information about the tool chain |
| loadCoreFileCheck( ) | check whether the core file is up to date |
| loadFlagsCheck( ) | check for illegal combinations of flags |
| loadModule( ) | load an object module into memory |
| loadModuleAt( ) | load an object module into memory |
| loadModuleAtFromFileName( ) | load an object module into memory |
| loadOutputToFile( ) | write a module's segments in a file |
| loadRelocLink( ) | Link the relocator Shared library to the OMF specific loader. |
| loadSegmentsAllocate( ) | allocate text, data, and bss segments |
| loadUndefSymAdd( ) | record an undefined symbol name |
| | |
| mainWindowCreate [win32] | Creates a main window for the application |
| markDelete | delete a mark |
| markGoto | move the source context to the position of a mark |
| markInfo | return information about a mark |
| markList | enumerate all marks |
| markSet | set a mark on a source line |
| memBlockCreate [Tcl] | create a memory block |
| memBlockDelete [Tcl] | delete a memory block, freeing its resources |
| memBlockDis [Tcl] | disassemble a memory block |
| memBlockDup [Tcl] | create a new block exactly like a given one |
| memBlockGet [Tcl] | get the elements in a memory block |
| memBlockGetString [Tcl] | get the memory block contents in string form |
| memBlockInfo [Tcl] | get information about a memory block |
| memBlockList [Tcl] | list the handles of all existing memory blocks |
| memBlockSet [Tcl] | set the elements in a memory block |
| memBlockSwap [Tcl] | switch the endianness of a block |
| memBlockWriteFile [Tcl] | write the memory block contents to a file |
| menuButtonCreate | create a button in a top level menu |
| menuCreate | create a new menu on the top menu bar |
| modAnalyze | analyze archives and/or object modules |
| modCalledBy | find all modules that call a given set of modules |
| modCalls | find all modules that are called by a given set of modules |
| modInfo | get info about module relationships |
| modSubtree | find (recursivley) all modules called by a set of modules |
| modSupertree | find (recursivley) all modules that call a set of modules |
| modTrace | trace module dependencies |
| msleep [Tcl] | sleep for the specified number of milliseconds |
| mxrDataDocCreate | create a module xref document |
| mxrDocValidate | test for duplicate symbol names and other bugs |
| mxrSizeGet | return the size of a set of modules |
| mxrSubtree | recursively, what modules are called by a given set of modules |
| mxrSupertree | recursively, what modules call a given set of modules |
| mxrTcGet | get the toolchain associated with an MxrDoc |
| | |
| noticePost | post a notice dialog |
| noticeUnpost | unpost a notice |
| | |
| objectCreate | create a new object in the application well |
| | |
| pixelsToDialogUnits [win32] | conversion routine |
| | |
| selection | return the text of the current selection in the code window |
| sourceContextDisplay | move the source context to a new location |
| sourceContextForget | forget cached information about a source file |
| sourceContextForgetAll | forget all cached information about source files |
| sourceRedisplay | redisplay the source window |
| symAdd( ) | create and add a symbol to a symbol table, including a group number |
| symByValueAndTypeFind( ) | look up a symbol by value and type |
| symByValueFind( ) | look up a symbol by value |
| symEach( ) | call a routine to examine each entry in a symbol table |
| symFindByName( ) | look up a symbol by name |
| symFindByNameAndType( ) | look up a symbol by name and type |
| symFindByValue( ) | look up a symbol by value |
| symFindByValueAndType( ) | look up a symbol by value and type |
| symRemove( ) | remove a symbol from a symbol table |
| systemColorsEnumerate [win32] | enumerates pre-defined system colors |
| | |
| targetArchitectureInit( ) | Set the target architecture related infomations. |
| textWindowAppend | add to the contents of a text window |
| textWindowCreate | create a text window |
| textWindowIsDisplayed | check if a text window is visible |
| textWindowPost | post a text window |
| textWindowSet | set the contents of a text window |
| tgtCpuAlignmentGet( ) | Returns the target CPU memory aligment. |
| tgtCpuFamilyGet( ) | Returns the target CPU family type. |
| tgtCpuFamilyNameGet( ) | Returns the target CPU family name. |
| tgtCpuNameGet( ) | Returns the target CPU name. |
| tgtCpuTypeGet( ) | Returns the target CPU type |
| tgtLoaderCheckRtnNameGet( ) | Returns the loader module verifier name. |
| tgtLoaderInitRtnNameGet( ) | Returns the loader initialization routine name. |
| tgtLoaderManageRtnNameGet( ) | Returns the loader module manager routine name. |
| tgtLoaderNameGet( ) | Returns the loader DLL name currently used. |
| tgtLoaderOmfTypeGet( ) | Returns the loader Object Module Format currently used. |
| tgtMemAlignGet( ) | return the alignment value for the target memory |
| tgtMemCacheGet( ) | get a block descriptor for target memory |
| tgtMemCacheSet( ) | give a block of target memory an attribute |
| tgtMemCalloc( ) | allocate a block of memory for an array |
| tgtMemFree( ) | free a block of memory |
| tgtMemMalloc( ) | allocate a block of memory from the system memory partition |
| tgtMemMove( ) | move a block on the target |
| tgtMemRead( ) | read a block of target memory |
| tgtMemRealloc( ) | reallocate a block of memory |
| tgtMemSet( ) | set a memory area to a particular value |
| tgtMemValloc( ) | allocate memory on a page boundary |
| tgtMemWidthRead( ) | read a block of target memory |
| tgtMemWidthWrite( ) | write a block to the target |
| tgtMemWrite( ) | write a block to the target |
| tgtMemWriteByte( ) | write a byte to the target |
| tgtMemWriteInt( ) | write an `int' to the target |
| tgtMemWriteShort( ) | write a `short' to the target |
| tgtModuleVerifyRtnNameGet( ) | Returns the module verifier routine name. |
| tgtRelocatorNameGet( ) | Returns the relocator DLL name currently used. |
| tgtRelocInitRtnNameGet( ) | Returns the relocator library initialization |
| tgtSegRelocatorRtnNameGet( ) | Returns the segment relocator routine name. |
| tgtSwapNeeded( ) | Returns TRUE if host and target byte order differs. |
| toolbarCreate [win32] | create a toolbar on a window |
| toolBarItemCreate | create a new tool bar button or update an old one |
| toolBarItemDelete | delete a toolbar item |
| ttySend | send text to a subprocess through the interface |
| | |
| WDB_CONTEXT_CONT | continue a context |
| WDB_CONTEXT_CREATE | create a context on the target |
| WDB_CONTEXT_KILL | kill a context on the target |
| WDB_CONTEXT_RESUME | resume a context on the target |
| WDB_CONTEXT_STATUS_GET | get the context of a status on the target |
| WDB_CONTEXT_STEP | single step a context |
| WDB_CONTEXT_SUSPEND | suspend a context on the target |
| WDB_DIRECT_CALL | call a function on the target in the agent's context |
| WDB_EVALUATE_GOPHER | execute a Gopher string |
| WDB_EVENTPOINT_ADD | add an asynchronous eventpoint |
| WDB_EVENTPOINT_DELETE | delete an eventpoint |
| WDB_EVENT_GET | upload an event from the target |
| WDB_FUNC_CALL | call a function on the target |
| WDB_MEM_CACHE_TEXT_UPDATE | synchronize cache after writing to the target |
| WDB_MEM_CHECKSUM | checksum a block of target memory |
| WDB_MEM_FILL | fill target memory with a pattern |
| WDB_MEM_MOVE | move memory on the target |
| WDB_MEM_PROTECT | write enable/disable a region of target memory |
| WDB_MEM_READ | read memory from the target |
| WDB_MEM_SCAN | scan a block of target memory for a pattern |
| WDB_MEM_WRITE | write the contents of host memory to target memory |
| WDB_MODE_GET | get the agent mode |
| WDB_MODE_SET | set the agent mode |
| WDB_REGS_GET | get the registers of a context on the target |
| WDB_REGS_SET | set the registers of a context on the target |
| WDB_TARGET_CONNECT | connect the target server to the target agent |
| WDB_TARGET_DISCONNECT | disconnect the target server from the target agent |
| WDB_TARGET_PING | probe the target |
| WDB_VIO_WRITE | write data to a virtual I/O channel |
| windHelpDisplay [unix] | displays specified link in a web browser |
| windHelpDisplay [win32] | displays specified link in a web browser |
| windHelpDocDirGet [unix] | gets the current doc directory |
| windHelpDocDirGet [win32] | gets the current doc directory |
| windHelpDocDirSet [unix] | sets the current doc directory |
| windHelpDocDirSet [win32] | sets the current doc directory |
| windHelpEntryLookup [unix] | gets the entry number in entry names list |
| windHelpEntryLookup [win32] | gets the entry number in entry names list |
| windHelpIndexGet [unix] | gets the current complete help index |
| windHelpIndexGet [win32] | gets the current complete help index |
| windHelpInit [unix] | initialises the help data base |
| windHelpInit [win32] | initialises the help data base |
| windHelpLinkGet [unix] | gets the hyper link |
| windHelpLinkGet [win32] | gets the hyper link |
| windHelpListGet [unix] | gets the list of help entries |
| windHelpListGet [win32] | gets the list of help entries |
| windowActivateCallbackGet [win32] | returns the script called when the window or dialog is activated |
| windowActivateCallbackSet [win32] | sets the Tcl script to be called when a dialog or window is activated |
| windowActiveGet [win32] | gets the name of the currently active Tcl window, dialog, or toolbar |
| windowActiveSet [win32] | sets the named Tcl window as the active window |
| windowClientSizeGet [win32] | retrieves the size of the client area of a dialog or window |
| windowClose [win32] | closes a dialog or window |
| windowCreate [win32] | creates a child window |
| windowEventGet [win32] | returns the most recent event that has occured in a dialog or window |
| windowExists [win32] | determines whether a particular window exists |
| windowExitCallbackGet [win32] | returns the script called when the user or system exits the dialog or window |
| windowExitCallbackSet [win32] | sets the Tcl script called when a dialog or window is exited |
| windowHandleGet [win32] | gets the internal Windows handle of a dialog or window |
| windowHelpFileGet [win32] | gets the path of help file. |
| windowHelpFileSet [win32] | sets the help file to be used for the named dialog or window |
| windowHelpIDGet [win32] | gets the help ID of the window |
| windowHelpIDSet [win32] | sets the help ID and (optionally) the help file to be used for named dialog or window |
| windowHidden [win32] | determines whether a particular UITcl window or dialog is hidden |
| windowHide [win32] | hides or shows a Tcl window, dialog, or toolbar |
| windowInitCallbackGet [win32] | returns the script called when the dialog or window is initialized |
| windowInitCallbackSet [win32] | sets the Tcl script called when a dialog or window is initialized |
| windowPositionGet [win32] | retrieves the position of a dialog or window |
| windowPositionSet [win32] | sets the position of a dialog or window |
| windowPropertySet [win32] | sets the value of a property |
| windowQueryCloseCallbackGet [win32] | returns the script called to determine whether the dialog or window can be closed safely |
| windowQueryCloseCallbackSet [win32] | sets the Tcl script to be called when closing a dialog or window |
| windowShow [win32] | shows or hides a Tcl window, dialog, or toolbar |
| windowShowCallbackGet [win32] | returns the script called when the dialog or window is displayed |
| windowShowCallbackSet [win32] | sets the Tcl script called when a dialog or window is displayed |
| windowSizeCallbackGet [win32] | returns the script called when the user or system resizes the dialog or window |
| windowSizeCallbackSet [win32] | sets the Tcl script to be called when a dialog or window has been resized |
| windowSizeGet [win32] | retrieves the size of a dialog or window |
| windowSizeSet [win32] | sets the size of a dialog or window |
| windowTimerCallbackGet [win32] | returns the timer script for the given dialog or window |
| windowTimerCallbackSet [win32] | sets or removes the timer script for the given dialog or window |
| windowTitleGet [win32] | gets the title of a dialog or window |
| windowTitleSet [win32] | sets the title of a dialog or window |
| windowVisible [win32] | determines whether a particular UITcl window or dialog is visible on the screen |
| wpwrLogErr( ) | log an error message. |
| wpwrLogHeaderSet( ) | set the message header |
| wpwrLogMsg( ) | log a message. |
| wpwrLogRaw( ) | log a raw message to `stderr' |
| wpwrLogWarn( ) | log a warning message. |
| wsArgv | examine/change original window system command arguments |
| wsBusyAnimation | check or set busy animation |
| wsHierarchy | print the window system hierarchy of graphical objects |
| wsObjectSelect | change to the help cursor and return the name of the object |
| wsRestart | restart the application |
| wsSync | flush pending requests to the window system |
| wsTitleSet | set the text of the window manager title bar |
| wsWindowGeom | return the geometry string of a window |
| wsWindowIconic | report whether a given window is iconified |
| wsWindowId | return the X Window ID of the application's top level window |
| wtxAgentModeGet( ) | get the mode of the target agent |
| wtxAgentModeGet [Tcl] | get the WDB agent mode |
| wtxAgentModeSet( ) | set the mode of the target agent |
| wtxAgentModeSet [Tcl] | set the WDB agent mode |
| wtxAsyncEventGet( ) | get an event from the asynchronous event list |
| wtxAsyncNotifyDisable( ) | stop the asynchronous event notification |
| wtxAsyncNotifyDisable [Tcl] | Stop the asynchronous event notification |
| wtxAsyncNotifyEnable( ) | start the asynchronous event notification |
| wtxAsyncNotifyEnable [Tcl] | Start the asynchronous event notification |
| wtxAsyncResultFree( ) | free memory used by a wtxAsyncEventGet() call result |
| wtxBreakpointAdd( ) | create a new WTX eventpoint of type breakpoint |
| wtxCacheTextUpdate( ) | synchronize the instruction and data caches. |
| wtxCacheTextUpdate [Tcl] | synchronize the instruction and data caches. |
| wtxClientDataGet( ) | get the client data associated with the WTX handle |
| wtxClientDataSet( ) | set the client data associated with the WTX handle |
| wtxClose [Tcl] | close a target server file |
| wtxCommandSend( ) | Pass a string to be interpreted by the target server |
| wtxConsoleCreate( ) | create a console window (UNIX only) |
| wtxConsoleCreate [Tcl] | create a target server console window (UNIX only) |
| wtxConsoleKill( ) | destroy a console (UNIX only) |
| wtxConsoleKill [Tcl] | kill a target server virtual I/O console (UNIX only) |
| wtxContextCont( ) | continue execution of a target context |
| wtxContextCont [Tcl] | continue a context stopped at a breakpoint |
| wtxContextCreate( ) | create a new context on the target |
| wtxContextCreate [Tcl] | create a new context on the target |
| wtxContextExitNotifyAdd( ) | add a context exit notification eventpoint |
| wtxContextKill( ) | kill a target context |
| wtxContextKill [Tcl] | kill a context |
| wtxContextResume( ) | resume execution of a target context |
| wtxContextResume [Tcl] | resume a suspended context |
| wtxContextStatusGet( ) | get the status of a context on the target |
| wtxContextStatusGet [Tcl] | get the status of a context |
| wtxContextStep( ) | single step execution of a target context |
| wtxContextStep [Tcl] | single step a context by machine instruction |
| wtxContextSuspend( ) | suspend a target context |
| wtxContextSuspend [Tcl] | suspend a context |
| wtxCpuInfoGet( ) | gets cpu related information from architecturedb file |
| wtxCpuInfoGet [Tcl] | explore target data base resource file to retrieve info |
| wtxDirectCall( ) | call a function on the target within the agent |
| wtxDirectCall [Tcl] | make a function call in the agent's context |
| wtxEach( ) | call a routine to examine each WTX-registered service |
| wtxEnumFromString [Tcl] | convert a WTX constant to numeric form |
| wtxEnumInfo [Tcl] | show the mapping between WTX constant names and numeric values |
| wtxEnumList [Tcl] | list all WTX constant types known |
| wtxEnumToString [Tcl] | convert a numeric WTX constant to symbolic form |
| wtxErrClear( ) | explicitly clear any error status for the tool |
| wtxErrDispatch( ) | dispatch an error with supplied code for the given handle |
| wtxErrExceptionFunc( ) | a function to handle an error using longjmp() |
| wtxErrGet( ) | return the last error for a handle |
| wtxErrHandlerAdd( ) | add an error handler for the WTX handle |
| wtxErrHandlerRemove( ) | remove an error handler from the WTX handle |
| wtxErrMsgGet( ) | fetch the last network WTX API error string |
| wtxErrorHandler [Tcl] | query or establish an error handler for a connection |
| wtxErrSet( ) | set the error code for the handle |
| wtxErrToMsg( ) | convert an WTX error code to a descriptive string |
| wtxEventAdd( ) | send an event to the target server |
| wtxEventAdd [Tcl] | send an event to all other tools attached to the target server |
| wtxEventGet( ) | get an event from the target |
| wtxEventGet [Tcl] | receive an event if any are waiting |
| wtxEventListGet( ) | get all the events in one call. |
| wtxEventListGet [Tcl] | get all the events in one call. |
| wtxEventpointAdd( ) | create a new WTX eventpoint |
| wtxEventpointAdd [Tcl] | add an agent eventpoint |
| wtxEventpointDelete( ) | delete an eventpoint from the target |
| wtxEventpointDelete [Tcl] | delete an eventpoint |
| wtxEventpointList( ) | list eventpoints on the target server |
| wtxEventpointList [Tcl] | list the eventpoints known to the agent |
| wtxEventpointListGet( ) | list eventpoints on the target server |
| wtxEventpointListGet [Tcl] | list the eventpoints known to the agent |
| wtxEventToStrType( ) | convert a WTX event enumeration type to a string |
| wtxExecutableFind [Tcl] | WDB / WTX requests executable path via document name |
| wtxExecutableFind [Tcl] | WDB / WTX requests executable path via document name |
| wtxFileClose( ) | close a file on the target server |
| wtxFileOpen( ) | open a file on the target server |
| wtxFuncCall( ) | call a function on the target |
| wtxFuncCall [Tcl] | call a function on the target |
| wtxGopherEval( ) | evaluate a Gopher string on the target |
| wtxGopherEval [Tcl] | request the evaluation of a Gopher script by the agent |
| wtxHandle [Tcl] | show the WTX handle stack or set the top element of the stack |
| wtxHostType [Tcl] | get the host-type code for the current process |
| wtxHwBreakpointAdd( ) | create a new WTX eventpoint of type hardware breakpoint |
| wtxInfo( ) | allocate and return a descriptor for the named service |
| wtxInfoQ( ) | return a list of all services registered with the Tornado registry |
| wtxInfoQ [Tcl] | return a list of existing servers |
| wtxInitialize( ) | initialization routine to be called by the WTX client |
| wtxLogging( ) | WDB / WTX requests logging controls |
| wtxLogging [Tcl] | WDB / WTX requests logging controls |
| wtxMemAddToPool( ) | add memory to the agent pool |
| wtxMemAddToPool [Tcl] | add memory to the agent pool |
| wtxMemAlign( ) | allocate aligned target memory |
| wtxMemAlign [Tcl] | allocate a block of aligned memory from the agent pool |
| wtxMemAlloc( ) | allocate a block of memory to the TS-managed target memory pool |
| wtxMemAlloc [Tcl] | allocate memory from the agent pool |
| wtxMemChecksum( ) | perform a checksum on target memory |
| wtxMemChecksum [Tcl] | compute the checksum on target memory |
| wtxMemDisassemble( ) | get disassembled instructions matching the given address |
| wtxMemDisassemble [Tcl] | query the target server disassembled instructions |
| wtxMemFree( ) | free a block of target memory |
| wtxMemFree [Tcl] | free a block of agent pool memory |
| wtxMemInfoGet( ) | get information about the target-server-managed memory pool |
| wtxMemInfoGet [Tcl] | return information about the agent pool |
| wtxMemMove( ) | move a block of target memory |
| wtxMemMove [Tcl] | move a block of memory on the target |
| wtxMemRead( ) | read memory from the target |
| wtxMemRead [Tcl] | read target memory into a memory block |
| wtxMemRealloc( ) | reallocate a block of target memory |
| wtxMemRealloc [Tcl] | reallocate a block of agent pool memory |
| wtxMemScan( ) | scan target memory for the presence or absence of a pattern |
| wtxMemScan [Tcl] | scan target memory for the presence or absence of a pattern |
| wtxMemSet( ) | set target memory to a given value |
| wtxMemSet [Tcl] | set a block of memory to a specified value |
| wtxMemWidthRead( ) | read memory from the target |
| wtxMemWidthRead [Tcl] | read memory from the target |
| wtxMemWidthWrite( ) | write memory on the target |
| wtxMemWidthWrite [Tcl] | write a memory block to the target |
| wtxMemWrite( ) | write memory on the target |
| wtxMemWrite [Tcl] | write a memory block to the target |
| wtxObjModuleByNameUnload( ) | unload an object module from the target |
| wtxObjModuleChecksum( ) | checks validity of target memory. |
| wtxObjModuleChecksum [Tcl] | checks validity of target memory. |
| wtxObjModuleFind [Tcl] | find an object module given a name or an ID |
| wtxObjModuleFindId( ) | find the ID of an object module given its name |
| wtxObjModuleFindName( ) | find object module name given its ID |
| wtxObjModuleInfoAndPathGet( ) | return information on a module given its ID |
| wtxObjModuleInfoAndPathGet [Tcl] | return information about an object module |
| wtxObjModuleInfoGet( ) | return information on a module given its module ID |
| wtxObjModuleInfoGet [Tcl] | return information about an object module |
| wtxObjModuleList( ) | fetch a list of loaded object modules from the target |
| wtxObjModuleList [Tcl] | fetch a list of IDs of object modules loaded on the target |
| wtxObjModuleLoad( ) | Load a multiple section object file |
| wtxObjModuleLoad [Tcl] | Load a multiple section object file |
| wtxObjModuleLoadCancel( ) | Stop an asynchronous load request |
| wtxObjModuleLoadCancel [Tcl] | Stop an asynchronous load request |
| wtxObjModuleLoadProgressReport( ) | get the asynchronous load status |
| wtxObjModuleLoadProgressReport [Tcl] | get the asynchronous load status |
| wtxObjModuleLoadStart( ) | Load a multiple section object file asynchronously |
| wtxObjModuleLoadStart [Tcl] | Load a multiple section object file asynchronously |
| wtxObjModuleUnload( ) | unload an object module from the target |
| wtxObjModuleUnload [Tcl] | unload an object module |
| wtxOpen [Tcl] | open a file for use with virtual I/O |
| wtxPath [Tcl] | return a pathname suitable for the environment |
| wtxProbe( ) | probe to see if the registry service is running |
| wtxRegister( ) | register the target server with the Tornado registry service |
| wtxRegister [Tcl] | add an entry to the Tornado registry |
| wtxRegisterForEvent( ) | ask the WTX server to send events matching a regexp |
| wtxRegisterForEvent [Tcl] | provide a regular expression to mask event delivery |
| wtxRegsGet( ) | read register data from the target |
| wtxRegsGet [Tcl] | read a block of register data from the target |
| wtxRegsSet( ) | write to registers on the target |
| wtxRegsSet [Tcl] | write a block of register data to the target |
| wtxResultFree( ) | free the memory used by a WTX API call result |
| wtxServiceAdd( ) | add a new service to the agent |
| wtxStrToContextId( ) | convert a string argument to a WTX_CONTEXT_ID_T |
| wtxStrToContextType( ) | convert a string argument to a WTX_CONTEXT_TYPE value |
| wtxStrToEventType( ) | convert a string to a WTX event enumeration type |
| wtxStrToInt32( ) | convert a string argument to an INT32 value |
| wtxStrToTgtAddr( ) | convert a string argument to a TGT_ADDR_T value |
| wtxSymAdd( ) | add a symbol with the given name, value, and type |
| wtxSymAdd [Tcl] | add a new symbol to the symbol table |
| wtxSymAddWithGroup( ) | add a symbol with the given name, value, type and group |
| wtxSymFind( ) | find information on a symbol given its name or value |
| wtxSymFind [Tcl] | locate a symbol in the symbol table |
| wtxSymListByModuleIdGet( ) | get a list of symbols given a module Id |
| wtxSymListByModuleNameGet( ) | get a list of symbols given a module name |
| wtxSymListFree( ) | free memory used to store symbols in a list |
| wtxSymListGet( ) | get a list of symbols matching the given search criteria |
| wtxSymListGet [Tcl] | query the target server symbol table |
| wtxSymRemove( ) | remove a symbol from the default target server symbol table |
| wtxSymRemove [Tcl] | remove a symbol from the symbol table |
| wtxSymTblInfoGet( ) | return information about the target server symbol table |
| wtxSymTblInfoGet [Tcl] | return information about the target server symbol table |
| wtxTargetAttach( ) | reattach to the target |
| wtxTargetAttach [Tcl] | attempt to reattach to the target |
| wtxTargetBootlineGet( ) | get the target bootline information string |
| wtxTargetBspNameGet( ) | get the target board-support-package name string |
| wtxTargetCpuTypeGet( ) | get the target CPU type code |
| wtxTargetEndianGet( ) | get the endianness of the target CPU |
| wtxTargetHasFppGet( ) | check if the target has a floating point processor |
| wtxTargetIpAddressGet( ) | gets target IP address. |
| wtxTargetName [Tcl] | return the name of the target server attached |
| wtxTargetReset( ) | reset the target |
| wtxTargetReset [Tcl] | reset the target |
| wtxTargetRtTypeGet( ) | get the target-runtime-type information |
| wtxTargetRtVersionGet( ) | get the target-runtime-version information |
| wtxTerminate( ) | terminate the use of a WTX client handle |
| wtxTimeout [Tcl] | return or set the current WTX timeout |
| wtxTimeoutGet( ) | get the current timeout for completion of WTX calls |
| wtxTimeoutSet( ) | set the timeout for completion of WTX calls |
| wtxToolAttach( ) | connect a WTX client to the target server |
| wtxToolAttach [Tcl] | attach to a target server |
| wtxToolConnected( ) | check to see if a tool is connected to a target server |
| wtxToolDetach( ) | detach from the target server |
| wtxToolDetach [Tcl] | detach from a target server |
| wtxToolIdGet( ) | return the tool identifier of the current tool |
| wtxToolIdGet [Tcl] | return the tool identifier of the current tool |
| wtxToolIdGet [Tcl] | return the tool identifier of the current tool |
| wtxToolName [Tcl] | return the name of the current tool |
| wtxToolNameGet( ) | return the name of the current tool |
| wtxTsInfoGet( ) | get information about the target server, the target, and the link to the target |
| wtxTsInfoGet [Tcl] | get information about the target server |
| wtxTsKill( ) | kill the target server |
| wtxTsKill [Tcl] | kill the target server |
| wtxTsLock( ) | lock the connected target server for exclusive access |
| wtxTsLock [Tcl] | lock the target server |
| wtxTsNameGet( ) | get the full name of the currently attached target server |
| wtxTsRestart( ) | restart the target server |
| wtxTsTimedLock( ) | lock the connected target server a limited time |
| wtxTsUnlock( ) | unlock the connected target server |
| wtxTsUnlock [Tcl] | unlock target server |
| wtxTsVersionGet( ) | return the Tornado version |
| wtxTsVersionGet [Tcl] | return Tornado version |
| wtxUnregister( ) | unregister the server with the Tornado registry |
| wtxUnregister [Tcl] | remove an entry from the Tornado registry |
| wtxUnregisterForEvent( ) | ask the target server to not send events matching |
| wtxUnregisterForEvent [Tcl] | ask the target server to not send events matching |
| wtxVerify( ) | verify that a WTX handle is valid for use |
| wtxVioChanGet( ) | get a virtual I/O channel number |
| wtxVioChanGet [Tcl] | claim a VIO channel |
| wtxVioChanRelease( ) | release a virtual I/O channel |
| wtxVioChanRelease [Tcl] | release a VIO channel |
| wtxVioCtl( ) | perform a control operation on a virtual I/O channel |
| wtxVioCtl [Tcl] | change the characteristics of a virtual I/O channel |
| wtxVioFileList( ) | list the files managed by the target server |
| wtxVioFileList [Tcl] | list the files managed by the target server |
| wtxVioWrite( ) | write data to a VIO channel |
| wtxVioWrite [Tcl] | virtual I/O write |
| WTX_AGENT_MODE_GET | WTX get debug agent mode |
| WTX_AGENT_MODE_SET | WTX set debug agent mode |
| WTX_CACHE_TEXT_UPDATE | WTX synchronize the instruction and data caches |
| WTX_CLOSE | WTX close a file or pipe |
| WTX_COMMAND_SEND | WTX pass a string to be interpreted by the target server |
| WTX_CONSOLE_CREATE | WTX create a virtual target console (UNIX only) |
| WTX_CONSOLE_KILL | WTX kill a virtual target console (UNIX only) |
| WTX_CONTEXT_CONT | WTX continue a context on the target |
| WTX_CONTEXT_CREATE | WTX create a context on the target |
| WTX_CONTEXT_KILL | WTX destroy a context on the target |
| WTX_CONTEXT_RESUME | WTX resume a context on the target |
| WTX_CONTEXT_STATUS_GET | WTX gets the context of a status on the target |
| WTX_CONTEXT_STEP | WTX step a context on the target |
| WTX_CONTEXT_SUSPEND | WTX suspend a context on the target |
| WTX_DIRECT_CALL | WTX call a function on the target within the agent |
| WTX_EVENTPOINT_ADD | WTX add an eventpoint |
| WTX_EVENTPOINT_ADD_2 | WTX add an eventpoint |
| WTX_EVENTPOINT_DELETE | WTX delete an eventpoint |
| WTX_EVENTPOINT_LIST | WTX return a list of eventpoints |
| WTX_EVENTPOINT_LIST_GET | WTX return a list of eventpoints |
| WTX_EVENT_ADD | WTX add an event |
| WTX_EVENT_GET | WTX get an event |
| WTX_EVENT_LIST_GET | WTX get all the events in one call |
| WTX_FUNC_CALL | WTX call a function on the target |
| WTX_GOPHER_EVAL | WTX evaluate a Gopher program |
| WTX_INFO_GET | WTX get information about a given server |
| WTX_INFO_Q_GET | WTX get information about a list of servers |
| WTX_MEM_ADD_TO_POOL | WTX add memory to the memory pool |
| WTX_MEM_ALIGN | WTX allocate aligned target memory |
| WTX_MEM_ALLOC | WTX allocate target memory |
| WTX_MEM_CHECKSUM | WTX perform a target memory checksum |
| WTX_MEM_DISASSEMBLE | WTX target memory disassembler |
| WTX_MEM_FREE | WTX free a block of target memory |
| WTX_MEM_INFO_GET | WTX get information about the target memory pool |
| WTX_MEM_MOVE | WTX move target memory |
| WTX_MEM_READ | WTX target memory read |
| WTX_MEM_REALLOC | WTX reallocate target memory |
| WTX_MEM_SCAN | WTX search for a pattern in target memory |
| WTX_MEM_SET | WTX target memory set |
| WTX_MEM_WIDTH_READ | WTX target memory read |
| WTX_MEM_WIDTH_WRITE | WTX target memory write |
| WTX_MEM_WRITE | WTX target memory write |
| WTX_OBJ_KILL | WTX object kill |
| WTX_OBJ_MODULE_CHECKSUM | WTX checks validity of the target memory |
| WTX_OBJ_MODULE_FIND | WTX find an object module |
| WTX_OBJ_MODULE_INFO_GET | WTX get information about an object module |
| WTX_OBJ_MODULE_LIST | WTX list loaded object modules |
| WTX_OBJ_MODULE_LOAD | WTX load an object module into target memory |
| WTX_OBJ_MODULE_LOAD_2 | WTX load an object module into target memory |
| WTX_OBJ_MODULE_UNLOAD | WTX unload an object module |
| WTX_OBJ_MODULE_UNLOAD_2 | WTX unload an object module |
| WTX_OPEN | WTX open a file or pipe |
| WTX_REGISTER | WTX register a server |
| WTX_REGISTER_FOR_EVENT | WTX register for events |
| WTX_REGS_GET | WTX get target registers |
| WTX_REGS_SET | WTX set target registers |
| WTX_SYM_ADD | WTX add a symbol |
| WTX_SYM_FIND | WTX find a symbol |
| WTX_SYM_LIST_GET | WTX get a list of symbols |
| WTX_SYM_REMOVE | WTX remove a symbol |
| WTX_SYM_TBL_INFO_GET | WTX get information about a symbol table |
| WTX_TARGET_ATTACH | WTX attach a target to the target server |
| WTX_TARGET_RESET | WTX reset a target |
| WTX_TOOL_ATTACH | WTX attach a tool to a target server |
| WTX_TOOL_DETACH | WTX detach a tool from a target server |
| WTX_TS_INFO_GET | WTX get target and target server information |
| WTX_TS_LOCK | WTX target server lock |
| WTX_TS_UNLOCK | WTX target server unlock |
| WTX_UNREGISTER | WTX unregister a server |
| WTX_UNREGISTER_FOR_EVENT | WTX unregister for events |
| WTX_VIO_CHAN_GET | WTX get a virtual I/O channel number |
| WTX_VIO_CHAN_RELEASE | WTX release a virtual-I/O-channel number |
| WTX_VIO_CTL | WTX virtual I/O control |
| WTX_VIO_FILE_LIST | WTX list files managed by the target server |
| WTX_VIO_WRITE | WTX write to a virtual I/O channel |