15 Nov 2019 00:15, Yi Wang, , ,
|
|
14 Nov 2019 09:02, Sam Hill, , ,
|
TPC pressure: 32 mbar Recirculation pressure 39 mbar
Had some problems with the Chronobox today but issues seem to have been resolved.
MB on |
13 Nov 2019 09:53, Xiang Xiao, , ,
|
18:54 TPC pressure 258 mabr, recirculation pressure 259 mbar
MB off
LED on |
12 Nov 2019 23:46, Yi Wang, , ,
|
08:41 TPC pressure 260 mbar, recirculation pressure 260 mbar
gas pocket ON
open dewar level: 50/120 cm |
11 Nov 2019 23:47, Yi Wang, , ,
|
08:38 TPC pressure 238 mbar, recirculation pressure 242 mbar
gas pocket ON
open dewar level: 60/120 cm |
11 Nov 2019 11:28, Sam Hill, , ,
|
20:30 TPC pressure 252 mbar, recirculation pressure 254 mbar
See DS Proto log for issues with chronobox
MB off |
11 Nov 2019 00:00, Yi Wang, , ,
|
08:45 TPC pressure 287 mbar, recirculation pressure 289 mbar, no bubble from gas pocket outlet, condenser is full
08:50 refill open dewar, open dewar level: 70/120 cm
Bubbler 8.56V, 512mA |
09 Nov 2019 23:55, Yi Wang, , ,
|
08:55 TPC pressure 314 mbar, recirculation pressure 319 mbar, no bubble from gas pocket outlet
08:59 refill condenser, TPC pressure 225 mbar, recirculation pressure 221 mbar,
08:59 Gas Pocket status: ON |
09 Nov 2019 11:02, Sam Hill, , ,
|
20:07November 9, 2019
Switch On LED
Switch OFF MB |
08 Nov 2019 23:13, Xiang Xiao, , ,
|
08:16, November 9, 2019
TPC pressure (mbar): 225
Recirculation pressure (mbar): 227 |
07 Nov 2019 23:26, Yi Wang, , ,
|
08:35 TPC pressure 315 mbar, recirculation pressure 310 mbar, no bubble from gas pocket outlet
08:29 refill condenser, TPC pressure 266 mbar, recirculation pressure 260 mbar,
08:30 Gas Pocket status: ON |
07 Nov 2019 12:41, Yi Wang, , ,
|
Evening checklist |
06 Nov 2019 12:33, Yi Wang , , ,
|
|
05 Nov 2019 11:14, Yi Wang, , ,
|
Stop fast circluating, will let the cryogenic system run in slow circlulating mode over the night.
MB2 OFF, LED ON |
04 Nov 2019 07:08, Alex / Sam, , ,
|
Normal mode channel by channel.
HV: on
LEDs: on |
04 Nov 2019 06:59, Alex / Sam, , ,
|
HV: off
LEDs: on
/home/dsproto/online/dsproto_sy4527 |
04 Nov 2019 06:45, Alex / Sam, , ,
|
HV: off
LEDs: off
python3 iv_curve.py --no_steering --start_v 30 --stop_v 70 --step_v 0.2 --caen_readback_tolerance_v 2 --filename ivdata/ivcurve_191104_HVoff_LEDoff.txt |
01 Nov 2019 19:06, Alex Kish, , ,
|
Faster P increase (40 mbar/hour). Unstable presure (20 mbar RMS).
|
01 Nov 2019 13:42, Alex Kish, , ,
|
Faster P increase (40 mbar/hour). Unstable presure (20 mbar RMS).
|
25 Oct 2019 11:45, Pierre-Andre Amaudruz, , ,
|
If there is more things to say! |
|