Light Injection Power supply monitoring (P0D)
1
Documentation for the light injection modules controlled through MSCB
Monitor the Light Injection power supply modules.
- The MSCB interface reads back in a logic form the status of the +15V and +5V of 4 individual channels. It also monitor the "Active state" of thos four channels. A Reset command is available seding a pulse to the requested unit.
- The frontend code handling the monitoring and the control is call felip0d.c. It resides on the t2kpodgsc:online/... A custom web page for the control is available (LI.html).
SS level in the LI rack on the top of the LI power supply module.
MSCB-GPIB_Rev2 schematics
LiP0d/GPIB pin assignments
