To inspect the interrupt/exception vector table, click Vector Table in the browser window selector. (This facility is available for all target architectures except the HP-UX simulator, PowerPC, and ARM.) The display is similar to Figure 6-17.

Vectors are numbered from 0 to X (X = number of interrupt/exception vectors). The connected routines or addresses are displayed, or if no routine is connected the following key words are be displayed:

standard exception handler

default trap (Sparc)

uninitialized interrupt vector

corrupted interrupt vector

If you set a new vector from WindSh and then update the browser, the new vector is highlighted as shown in Figure 6-18.