Proto0 backup ELOG

HW-Time-Slice Firmware-Filter Software vx2740 Steering Module Reports MVM MVM Vexos MVM-Bug listing MVM TRIUMF Local DS Prototype DS Cryogenic For Shifters BCIT-31 ChronoBox Run Operation DS-DAQ

CERN DS-Proto0 read-only backup, Page 1 of 8

Not logged in

Find | Config | Help

Full | Summary | Threaded

148 Entries

Goto page 1, 2, 3 ... 6, 7, 8 Next All

ID	Date	Author	Type	Category	Subject	Text
3	13 Dec 2018 11:02	Thomas	Routine	Hardware	Testing V1725 digitizers	Couple weeks of work documented in one elog... V1725 serial numbers: 455, 392, 460, 462,
4	09 Jan 2019 12:22	Thomas	Routine	General	V1725 LVDS outputs	Pierre figured out that NIM crate not working. We now see LVDS outputs from the individual channels firing.
5	11 Jan 2019 11:07	Thomas	Routine	Digitizer	Data corruption for ADC channels	I modified the analyzer so that it shows data from all four modules.
6	17 Jan 2019 15:47	Thomas	Routine	Hardware	Added raided HD to ds-proto-daq	Added pair of 10TB hard-drives in raid-1 to ds-proto-daq. MIDAS data files will get written to this raid volume.
7	21 Jan 2019 13:05	Thomas, Pierre	Routine	Digitizer	Tests of V1725 baseline and triggering	A little progress on a couple fronts: 1) We got the baseline DAC setting working
8	28 Jan 2019 01:44	Thoms	Routine	Software	Added web display of V1725 waveforms	I added javascript webdisplay of the V1725 waveforms to the Darkside setup. You can see the waveform display here:
11	07 Feb 2019 17:30	Thomas	Routine	Software	Testing the maximum data throughput	First check the maximum trigger rate and maximum data rate for different sample lengths (for each channels):
15	05 Mar 2019 10:36	Thomas	Routine	Digitizer	Switched to standard V1725 firmware	It turns out that the ZLE V1725 firmware we are using only supports reading out up to 4000 samples per channel.
16	05 Mar 2019 14:20	Thomas	Routine	Hardware	Installed network card	I installed a PCIe 1Gbps network card and configured it as a private network. The PC (ds-proto-daq) is
17	06 Mar 2019 14:16	Thomas	Routine	General	Retested the chronobox trigger logic	I retested the chronobox trigger generation: 1) Inserting moderate sized pulse into channel
18	06 Mar 2019 15:10	Thomas, Pierre	Routine	Trigger	Setup of chronobox	Summary of setup of chronobox on network (mostly done by Pierre):
19	06 Mar 2019 18:19	Bryerton Shaw	Routine	Trigger	Setup of chronobox	The SDcard is currently required for operation of the device, the ext3/4 filesystem will immediately fail upon removal.
20	11 Mar 2019 12:30	Thomas	Routine	Trigger	New chronobox firmware; run start/stop implemented	a) Bryerton implemented new version of the firmware. New features:
21	11 Mar 2019 15:27	Thomas	Routine	Trigger	New chronobox firmware; run start/stop implemented	> f) However, I found that the frontend program still consistently failed with this error
25	03 Apr 2019 15:11	Thomas	Routine	Software	CERN SSO proxy for ds-proto-daq	Pierre and I got the CERN proxy setup for the Darkside prototype.
26	03 Apr 2019 15:31	Thomas	Routine	Software	test of elog	The last elog didn't go out cleanly. Modified the elogd.cfg to point to the proxy. Try again.
27	08 Apr 2019 08:31	Thomas	Routine	General	General work - day 1 at CERN	Notes on day: 1) Fixed the problem with the network interfaces.
28	10 Apr 2019 05:40	Thomas	Routine	General	General work - day 3 at CERN	Several points: 1) Gave a series of tutorial on DAQ to DS
29	11 Apr 2019 08:20	Thomas	Routine	Trigger	Missing ZMQ banks	I have done a couple longer tests of the DAQ setup. The runs were done with a high trigger rate of ~60Hz, with
30	02 Jul 2019 18:01	Thomas	Routine	Software	MIDAS running again	Darkside people seem to be doing some tests at CERN next week. It looks like they aren't going to use our DAQ (they will I think just

Goto page 1, 2, 3 ... 6, 7, 8 Next All

ELOG V3.1.4-cb3afcd8