daqbackup:/dev/sda 1575552301 smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.21.3.el7.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: JMicron based SSDs Device Model: KINGSTON SV200S364G Serial Number: 12HA30HXKATK Firmware Version: E120506a User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Dec 5 05:25:01 2019 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x04) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 32) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Unknown_JMF_Attribute 0x0007 100 100 050 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 7 Unknown_JMF_Attribute 0x000b 100 100 050 Pre-fail Always - 0 8 Unknown_JMF_Attribute 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 53499 10 Unknown_JMF_Attribute 0x0013 100 100 050 Pre-fail Always - 0 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 53 167 Unknown_JMF_Attribute 0x0022 100 100 000 Old_age Always - 0 168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 169 Unknown_JMF_Attribute 0x0013 100 100 010 Pre-fail Always - 0 173 Erase_Count 0x0012 200 200 000 Old_age Always - 0 0 0 175 Bad_Cluster_Table_Count 0x0013 100 100 010 Pre-fail Always - 0 192 Unexpect_Power_Loss_Ct 0x0012 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 044 044 030 Pre-fail Always - 44 (Min/Max 28/46) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 240 Unknown_JMF_Attribute 0x0013 100 100 050 Pre-fail Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.