daq02.ucn:/dev/sda 1575550081 dev="/dev/sda"> smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-957.27.2.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37120G Serial Number: 50026B777500E44A LU WWN Device Id: 5 000000 000000000 Firmware Version: SBFK71E0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Dec 5 04:48:02 2019 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 17149 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 40 148 Unknown_Attribute 0x0000 255 255 000 Old_age Offline - 0 149 Unknown_Attribute 0x0000 255 255 000 Old_age Offline - 0 167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 12 170 Bad_Blk_Ct_Erl/Lat 0x0013 100 100 010 Pre-fail Always - 0/14 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 43 (Average 17) 181 Program_Fail_Cnt_Total 0x0012 100 100 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0000 255 255 000 Old_age Offline - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 26 194 Temperature_Celsius 0x0023 075 068 000 Pre-fail Always - 25 (Min/Max 17/32) 196 Not_In_Use 0x0000 100 100 000 Old_age Offline - 0 199 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 218 CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 98 233 Flash_Writes_GiB 0x0013 100 100 000 Pre-fail Always - 1018 241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 323 242 Lifetime_Reads_GiB 0x0012 100 100 000 Old_age Always - 4680 244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 17 245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 43 246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 102420 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.