# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
 
# The loopback interface
auto lo
iface lo inet loopback


# Wireless interfaces
#
# Example of an unencrypted (no WEP or WPA) wireless connection
# that connects to any available access point:
#
iface wlan0 inet dhcp
	wireless_mode managed
	wireless_essid any

iface tiwlan0 inet dhcp
	wireless_mode managed
	wireless_essid any
#
#
# Same as above but locked to a specific access point:
#
#iface wlan0 inet dhcp  
#	wireless_mode managed
#	wireless-essid some-essid
#
# A WEP encrypted connection locked to a specific access point:
#
#iface wlan0 inet dhcp  
#	wireless-essid some-essid
#	wireless-key s:My-PlainText-Password
#	wireless-mode managed                  
#
# A WPA1 or WPA2 encrypted connection locked to a specific access point.
# This is the best option for non-roaming, single-network usage.
# Note that your card may require a firmware update to use WPA. 
# Some distributions install a temporary volatile firmware update on ifup.
#
#iface wlan0 inet dhcp                                                   
#	wpa-essid some-essid                                          
#	wpa-psk My-PlainText-Password                                              
#
# A WPA1 or WPA2 encrypted connection using an external configuration file
# for wpa-supplicant. This is the way to go if you need to configure multiple
# networks with different keys and / or WPA settings and roaming support.
#
# iface wlan0 inet dhcp
#    wpa-conf /etc/wpa_supplicant.conf
#    wpa-driver hostap



iface atml0 inet dhcp

# Wired or wireless interfaces
auto eth0
iface eth0 inet dhcp
        pre-up /bin/grep -v -e "ip=[0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+" /proc/cmdline > /dev/null

iface eth1 inet dhcp

# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet dhcp

# Zaurus 2.4 Lineo net_fd; obsolete
iface usbd0 inet static
	address 192.168.129.201
	netmask 255.255.255.0
	network 192.168.129.0
	gateway 192.168.129.200

# iPAQ 2.4 mach-sa1100/usb-eth
# (192.168.0.202 is the iPAQ's IP, 192.168.0.200 is the host's IP)
iface usbf inet static
        address 192.168.0.202
        netmask 255.255.255.0
        network 192.168.0.0
        gateway 192.168.0.200

# Bluetooth networking
iface bnep0 inet dhcp