A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
S
sysAuxClkConnect( ) connect a routine to the auxiliary clock interrupt sysAuxClkDisable( ) turn off auxiliary clock interrupts sysAuxClkEnable( ) turn on auxiliary clock interrupts sysAuxClkRateGet( ) get the auxiliary clock rate sysAuxClkRateSet( ) set the auxiliary clock rate sysBspRev( ) return the bsp version/revision identification sysBusIntAck( ) acknowledge a bus interrupt sysBusIntGen( ) generate a bus interrupt sysBusTas( ) test and set a location across the bus sysBusToLocalAdrs( ) convert a bus address to a local address sysClkConnect( ) connect a routine to the system clock interrupt sysClkDisable( ) turn off system clock interrupts sysClkEnable( ) turn on system clock interrupts sysClkRateGet( ) get the system clock rate sysClkRateSet( ) set the system clock rate sysHwInit( ) initialize the system hardware sysHwInit2( ) configure and initialize additional system features sysIntDisable( ) disable a bus interrupt level sysIntEnable( ) enable a bus interrupt level sysLocalToBusAdrs( ) convert a local address to a bus address sysMailboxConnect( ) connect a routine to the mailbox interrupt sysMailboxEnable( ) enable the mailbox interrupt sysMemTop( ) get the address of the top of VxWorks memory sysModel( ) return model name of the system CPU sysNvRamGet( ) get contents of non-volatile RAM sysNvRamSet( ) write to non-volatile RAM sysPhysMemTop( ) get the address of the top of physical memory sysProcNumGet( ) get processor number sysProcNumSet( ) set the processor number sysToMonitor( ) transfer control to the ROM monitor T
tyCoDevCreate( ) create a device for the onboard ports tyCoDrv( ) initialize the tty driver