/********************************************************************\

  Name:         config.h
  Created by:   Stefan Ritt


  Contents:     Configuration file for 
                for SCS-210 RS232 node

  $Id: scs_210.c 4906 2010-12-09 10:38:33Z ritt $

\********************************************************************/

/* Define device name. Used by various parts of the framwork to enable
   or disable device-specific features */
#define SCS_210

/* define CPU type */
#define CPU_C8051F120

/* include file for CPU registers etc. */
#include <c8051F120.h>

/* CPU clock speed */
#define CLK_98MHZ

/* ports for LED's */
#define LED_0 P3 ^ 4
#define LED_1 P3 ^ 3

/* polarity of LED: "0" if a low level activates the LEDs, 
   "1" if a high level activates the LEDs */
#define LED_ON 0

/* port pin for RS485 enable signal */
#define RS485_EN_PIN P3 ^ 5

/* switches to activate certain features in the framework */
#define CFG_UART1_DEVICE              // external device via UART1