mv2304 : Routines

 

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

 

I
	inOrderExecute( )	enforce in-order execution of PowerPC accesses
P
	pciConfigBdfPack( )	pack parameters for the Configuration Address Register
	pciConfigInByte( )	read one byte from the PCI configuration space
	pciConfigInLong( )	read one longword from the PCI configuration space
	pciConfigInWord( )	read one word from the PCI configuration space
	pciConfigLibInit( )	initialize the configuration access-method and addresses
	pciConfigModifyByte( )	Perform a masked longword register update
	pciConfigModifyLong( )	Perform a masked longword register update
	pciConfigModifyWord( )	Perform a masked longword register update
	pciConfigOutByte( )	write one byte to the PCI configuration space
	pciConfigOutLong( )	write one longword to the PCI configuration space
	pciConfigOutWord( )	write one 16-bit word to the PCI configuration space
	pciDevConfig( )	configure a device on a PCI bus
	pciFindClass( )	find the nth occurence of a device by PCI class code.
	pciFindDevice( )	find the nth device with the given device & vendor ID
	pciSpecialCycle( )	generate a special cycle with a message
S
	sysAuxClkConnect( )	connect a routine to the auxiliary clock interrupt
	sysAuxClkDisable( )	turn off auxiliary clock interrupts
	sysAuxClkEnable( )	turn on auxiliary clock interrupts
	sysAuxClkInit( )	raven aux. clock initialization routine
	sysAuxClkRateGet( )	get the auxiliary clock rate
	sysAuxClkRateSet( )	set the auxiliary clock rate
	sysBspRev( )	return the BSP version and revision number
	sysBusIntAck( )	acknowledge a bus interrupt
	sysBusIntGen( )	generate a bus interrupt
	sysBusProbe( )	probe a bus address based on bus type.
	sysBusRmwDisable( )	Disable Read-Modify-Write (RMW) cycle on the VMEbus.
	sysBusRmwEnable( )	enable Read-Modify-Write (RMW) cycle on VMEbus
	sysBusTas( )	test and set a specified location
	sysBusTasClear( )	clear a location set by sysBusTas()
	sysBusToLocalAdrs( )	convert a bus address to a local address
	sysClkConnect( )	connect a routine to the system clock interrupt
	sysClkDisable( )	turn off system clock interrupts
	sysClkEnable( )	turn on system clock interrupts
	sysClkRateGet( )	get the system clock rate
	sysClkRateSet( )	set the system clock rate
	sysCpuCheck( )	confirm the CPU type
	sysDec21x40EnetAddrGet( )	retrive ethernet address.
	sysGetBusSpd( )	get the speed of the 60x processor bus
	sysGetMpuSpd( )	get the speed of the MPC750 processor.
	sysHwInit( )	initialize the system hardware
	sysHwInit2( )	initialize additional system hardware
	sysIbcInit( )	Initialize the IBC
	sysIbcIntDisable( )	disable a IBC interrupt level
	sysIbcIntEnable( )	enable a IBC interrupt level
	sysIbcIntHandler( )	handler of the sl82565 IBC interrupt.
	sysIbcIntLevelSet( )	set the interrupt priority level
	sysIntDisable( )	disable a bus interrupt level
	sysIntEnable( )	enable a bus interrupt level
	sysLanIntDisable( )	disable the LAN interrupt
	sysLanIntEnable( )	enable the LAN interrupt
	sysLocalToBusAdrs( )	convert a local address to a bus address
	sysMailboxConnect( )	connect a routine to the mailbox interrupt
	sysMailboxDisable( )	disable the mailbox interrupt
	sysMailboxEnable( )	enable the mailbox interrupt
	sysMemTop( )	get the address of the top of VxWorks memory
	sysModel( )	return the model name of the CPU board
	sysMpicInit( )	initialize the MPIC in the Raven
	sysMpicIntHandler( )	handle an interrupt received at the Mpic
	sysNvRamGet( )	get the contents of non-volatile RAM
	sysNvRamSet( )	write to non-volatile RAM
	sysNvRead( )	read one byte from NVRAM
	sysNvWrite( )	write one byte to NVRAM
	sysPciExtRavenInit( )	initialize the extended portion of the Raven PCI header
	sysPciProbe( )	probe a PCI bus address
	sysPhysMemTop( )	get the address of the top of physical memory
	sysProbeErrClr( )	clear errors associated with probing an address on a bus.
	sysProcNumGet( )	get the processor number
	sysProcNumSet( )	set the processor number
	sysRavenErrClr( )	Clear error conditions in Raven
	sysScsiConfig( )	system SCSI configuration
	sysScsiInByte( )	BSP-specific byte input routine
	sysScsiInit( )	initialize an on-board SCSI port
	sysScsiOutByte( )	BSP-specific byte output routine
	sysSerialChanGet( )	get the SIO_CHAN device associated with a serial channel
	sysSerialHwInit( )	initialize the BSP serial devices to a quiescent state
	sysSerialHwInit2( )	connect BSP serial device interrupts
	sysSerialReset( )	reset all serial devices to a quiescent state
	sysToMonitor( )	transfer control to the ROM monitor
	sysUniverseInit( )	initialize registers of the Universe chip
	sysUniverseReset( )	reset the Universe VME chip
	sysUnivIntConnect( )	connect an interrupt handler for an interrupt type
	sysUnivIntDisable( )	disable Universe-supported interrupt(s)
	sysUnivIntEnable( )	enable Universe-supported interrupt(s)
	sysUnivIntLevelSet( )	set a Universe-supported interrupt level
	sysUnivLevelDecode( )	decode highest pending priority Universe interrupt
	sysUnivVERRClr( )	Universe VMEbus Error Clear routine
	sysUnivVmeIntr( )	Raven VMEbus interrupt handler
	sysUsDelay( )	delay at least the specified amount of time (in microseconds)
	sysVmeProbe( )	probe a VME bus address